Rointe D Series, 0330RAD, 0550RAD, 0770RAD Manual

Rointe D Series, 0330RAD, 0550RAD, 0770RAD Manual

Also See for D Series:

Advertisement

Rointe D Series, 0330RAD, 0550RAD, 0770RAD Manual


SYMBOLS


This symbol indicates a medium-high risk hazard which can result in serious injury or even death.
DO NOT COVER. Do not dry or leave clothes or towels on the radiator. Do not leave or place magazines, spray cans, volatile substances, or similar objects within 250 mm of the radiator.
burn hazardHOT SURFACE. This symbol indicates that your surfaces are hot during and immediately after use. These must not be touched: danger of burns.
OBSERVE THE INSTRUCTIONS IN THE MANUAL. Please read this manual carefully before installing and using the product. Keep it for later use. Read all instructions and safety warnings. Failure to follow these can result in electric shock, fire or serious injuries.

INSTALLATION

We recommend using a trusted Rointe supplier for installation of the product. Find the nearest one by calling us on 0203 321 5929 or using the locator on www.rointe.co.uk.

Prior to installation, please locate the metal tag located at the back of the product and note the product reference and serial number. You will need this information to register your guarantee. See section 10 for help on how to register the guarantee.

Do not install the product directly over an electrical outlet or junction box. Do not install the product or use it outdoors. Do not install directly under a shelf. This product is designed to be installed on an interior wall using the ROINTE template, the installation kit and the fixings supplied. Do not install the product in such a way that it encounters the power cable.

The product must be mounted on the wall in the position shown in the accompanying image using the brackets and with the fixings supplied.
Our products transfer heat through the natural air convection. If the product is covered, this will disrupt the airflow and could cause overheating. It must be positioned in accordance with the minimum distances shown in the accompanying picture.

The product has an IP24 degree of protection and can be used in bathrooms, but not in the vicinity of bathtubs, taps, showers, water connections, toilets, swimming pools or other masses of water. The product can only be installed in zone 3 of the accompanying picture. The product must never be installed where it, the switches or the control panel are within the reach of people in the water. Never use the product with wet hands. Do not place any water containers (glasses, vases, etc.) on or near the product.
INSTALLATION - Step 1
An installation kit is included in the product packaging. You will need a drill, a rubber mallet, a spirit level and a pencil to complete the installation.


The weight of some of the products may be heavy. The installation may require two people.

Please follow these instructions carefully.

  1. Remove the packaging and check that the installation contains brackets, screws, rawl plugs and a cardboard template.
  2. Select a suitable location on the wall. Place thetemplate on the wall and mark the holes for the brackets and screws. Observe the minimum distance requirements from the previous page.
    Use the floor as a base for the template, not the skirting board.
  3. Remove the template and carefully drill out themarked holes.
  4. Secure the upper brackets with the rawl plugsand screws provided. Then fix the lower bracket.To distinguish it, the lower bracket has a different design from the top ones.
    INSTALLATION - Step 2
  5. Slide the product up and down over the fixedbrackets.
  6. Check the straightness with a spirit level and adjust the supports accordingly if necessary.
  7. Connect your product to the power supply andswitch it on.
  8. See section 5 for operating instructions.


Measurement template per model.
INSTALLATION - Step 3

SCREEN & KEYPAD

SCREEN & KEYPAD

* PILOT WIRE function not available in UK. Only on demand.

SYMBOL DESCRIPTION SYMBOL DESCRIPTION
Heating element - active MANUAL function - active
OPEN WINDOWS function - DETECTED PILOT WIRE function - active
OPEN WINDOWS function - ACTIVE AUTOMATIC function - active when USER mode active
Energy consumption status - green / amber / red MANUAL function - active when USER mode active
Fuzzy Logic Control technology - active PILOT WIRE function active* when USER mode active
COMFORT mode - active Connected to the server and router - sending and receiving.
ECO mode - active Connected to the server and router - maximum net signal.
ANTI-FROST mode - active Connected to the server and router - minimum net signal.
Control panel locked through keypad Connected to router. Not connected to the server.
Control panel locked through remote Not connected to the server or to the router.
AUTOMATIC function - active * PILOT WIRE function not available in UK. Only on demand.

FUNCTIONALITY & PROGRAMMING

SWITCHING ON AND OFF (STAND-BY)

To switch the product on, please press the button on the keypad once.
After 3 seconds the temperature, time and days of the week will show on the display panel.
To switch the product off, please press the button again once.
The product will go into stand-by mode with the word 'STAND-BY' displayed on the display panel. After 3 seconds the Rointe logo will appear.

ADJUST THE DAY AND TIME

It is possible to change the radiator time from the control panel, but it is preferable to wait for automatic synchronisation once it is paired with the Rointe Connect application and the product is connected to the E-life Technology servers.

Pressing the key, you can access the Main Menu. To move left press the button and to move right press the button. Once the icon is highlighted on the display panel, press the button to access.
Now use the and buttons again to select the clock option and press to access.
Use the and buttons to set the hour and then press to confirm. Then use the and buttons to set the minutes and press to confirm. Finally, use the and buttons to set the day (1 = Monday, 2 = Tuesday etc.) and confirm by pressing the button.

ADJUST THE TEMPERATURE

To change the temperature, please press the or button. To decrease the temperature press the button and to increase the temperature press the button.
When the room temperature is lower than the set temperature on the display panel, the product will come on with the symbol appearing in the top right of the display panel.
When the Fuzzy Logic Energy Control technology is activated the symbol will replace the symbol in the top right of the display panel.

LOCK THE CONTROL PANEL

To lock the keypad manually, please hold and press the button AND the button TOGETHER for 3 seconds. The symbol will appear on the display panel and the keys will not respond.
To unlock the keypad manually, please hold and press the button AND the button TOGETHER for 3 seconds. To lock the keypad using a remote control, please see the corresponding instruction manual for the remote control separately.
When locking from the mobile application, the remote keypad lock icon will appear on the screen . When pressing any key on the product, the image on the right will be displayed on the screen. The remote keypad lock can only be unlocked from the mobile application.
The Main Menu is accessed by pressing the menu button. You can navigate through the different options available on the menu by pressing the and buttons to move left and right respectively and to scroll through all 4 options. The selected sub-menu will be highlighted with a frame, as shown in the image to the right on the 'Settings' section of the display panel.
The below icons displayed on the screen take you to the following sub-menus:
Settings Energy Equilibrium / Balance Program
The 'Settings´ sub-menu configures the technical parameters of your product. To access, select the icon displayed in the Main Menu screen and press to confirm.
Use the and buttons to move across the different options on the sub-menu to choose your parameter and press to access.
The below icons displayed on the screen take you to the following parameters:
Display backlight brightness Wi-Fi settings Language Time
  • Adjust display backlight brightness
This allows you to change the brightness of the display panel in both the STAND-BY and ON modes separately. To change the brightness of the display panel ensure the icon is highlighted and press the button to confirm. Then with the and buttons you can switch between the two modes.
With the and buttons you can increase or decrease the brightness as you wish. The cursor indicates the intensity of the light. Once you have set the required brightness press the button to save and exit.
  • Wi-Fi settings
This option prepares the product to perform the PAIRING mode, creating its own network to which we will connect for the correct configuration of the product. Make sure that the icon is flashing and confirm with .
The next screen will show the data of the network created, the name of the Wi-Fi network (NET:) and the password (PIN:). Pressing the button will exit the PAIRING mode, returning to the main screen.
Both to enter and exit the submenu you have to wait about 15 seconds. In addition, the product will restart.
  • Change the language
To change the language of your product, ensure the icon is highlighted in the 'Settings' sub-menu and press the button to access.
Use the and buttons to move up or down respectively until your chosen language is highlighted and confirm by pressing the button.
  • Adjust the day and time
This option sets the hour, minutes and day of the week in your product.
The energy submenu gives access to the functions related to the energy management of the product. Select using the keys and the icon of the main menu. Press to access this screen. The following icons allow access to the different submenus:
OPEN WINDOWS function Rointe Eye Detect function
* Not available in UK. Only on demand*
Effective Power function Information
  • Open WINDOWS function
This option allows you to activate or deactivate the OPEN WINDOWS function. Use the and buttons and , to select ON to activate and OFF to deactivate. Once the desired option has been selected, press to confirm and exit.
  • Rointe Eye Detect function
Allows you to enable or disable the Rointe Eye Detect function. Using the and buttons select ON to activate or OFF to disable. Once the desired option is selected press to confirm and return to the main display.
  • Efective Power function
To check the Power status of your product, make sure the icon is flashing in the 'Energy' submenu and press the button to access. This option shows on the display the actual consumption time of the product and the total time during which our product is connected to the mains. After a few seconds without pressing any button, the display will show the nominal power and the effective power of the product. The effective power corresponds to the average power value that our product actually consumes during operation.
  • Information
This function will display the software version, the date of this release and the rated power of the product.
To access this information, ensure the icon is highlighted in the 'Energy' submenu and press the button to confirm. The information will then show in the display panel. To exit press the button or press the button again to move onto the next display in the Information function.
Pressing , the screen displays the Wi-Fi connection status, connection type, IP address, subnet mask and gateway. To exit press the or press to return to the next screen in the information function.
By pressing we can know the MAC address and RSSI, signal strength which is measured in dbm. When this appears, if you press the power button once more, it gives you the option to update the firmware. If you press the same button again it will ask you "Wi-Fi?" and you will have to answer yes or no. It then restarts after a few seconds of waiting. To exit the information screen, press .
The balance submenu makes the product work in MANUAL function with a constant temperature of 19°C. Access it by selecting the balance icon using the keys and . Confirm by pressing the key . Once pressed, the product returns to the main screen, with the temperature set at 19°C and the MANUAL function icon on.

This section explains the operational aspects of your product in its various functions and modes.

What are the functions of MANUAL, AUTOMATIC and PILOT WIRE* functions?

MANUAL This function allows you to change the product between the COMFORT, ECO and ANTI-FROST modes and to change the temperature.
AUTOMATIC This function will activate the programming that has previously been set in the product.
PILOT WIRE This function allows the product to be controlled by a central programmer.
* Not available in UK. Only on demand*

What are the COMFORT, ECO and ANTI-FROST modes?

COMFORT ECO ANTI-FROST
From 19ºC to 30ºC From 7.5ºC to 18.5ºC 7ºC
The 'Program' sub-menu provides access to functions related to programming the product. To access, select the icon displayed in the Main Menu screen, the buttons and and press to confirm. The icons below provide access to the various submenus explained below:
MANUAL / AUTOMATIC functions Programming options USER mode PILOT WIRE function
* Not available in UK. Only on demand.*

MANUAL / AUTOMATIC FUNCTIONS

To change or choose the MANUAL or AUTOMATIC function, ensure the icon is highlighted in the 'Program' sub-menu and press the button to confirm. You can change from AUTOMATIC to MANUAL and vice versa by pressing the button again. The Automatic function activates the programming set in the product.
On the display panel, the symbol will appear for the AUTOMATIC function and the symbol for the MANUAL function.

PROGRAMMING OPTIONS

To start programming you must be in AUTOMATIC mode. Press the flashing icon using the buttons and and confirm by pressing the button .
  • Start programming for AUTOMATIC function
    To program the AUTOMATIC mode, see points above and ensure that START PROGRAMMING is highlighted. Press the button to access and the display panel will show a flashing screen.
    1. Select COMFORT mode temperature
      COMFORT mode will be programmed first. Select the COMFORT mode temperature between 19ºC and 30ºC using the and buttons. The icon and the temperature will flash. Press the button to confirm.
    2. Select ECO mode temperature
      ECO mode will be programmed next. Select the ECO mode temperature between 7.5ºC and 18.5ºC using the and buttons. The icon and the temperature will flash. Press the button to confirm.
    3. Select the Days
      The days of the week will start flashing on the display panel and show as DAY 1, DAY 2, DAY 3 etc.
      Use the and buttons to move forwards or backwards through the days. Press to select the day or days that you wish to include in your AUTOMATIC program. The day will stop flashing once selected. Repeat for all the days you wish to program and once all days are selected press the button to move onto setting the hour.
    4. Select the Hours
      Once step 3 has been completed, 0h appears on the display panel. 0h is equal to midnight. Use the and buttons to select the hour you wish to change. Use the button to change the mode (COMFORT, ECO or nothing) for the hour you wish to modify. The corresponding icon for that mode will appear at the top of the screen. To finish the programming press or leave for 30 seconds without pressing any buttons. To change the programming go back to step 1 and proceed as described before.
      *If you wish to have individual days with different programming within your program you will need to modify each day separately, starting from the Main Menu again for each day/days. Follow Steps 1 to 4 above to program multiple differing days/ hours/temperatures.
      If you wish to activate the anti-frost mode in the hours that do not have COMFORT or ECO mode, from the main screen of the radiator and in automatic mode, press the key . If you want to reverse this action, press .

USER MODE

To enter the USER function, ensure the icon is highlighted in the 'Program' sub-menu and press the button to access. A 4-digit PIN code is required in order to access the menu. The default PIN is 0000.
To enter the PIN use the and and and buttons to move left, right, up or down to select the correct numbers, pressing after each number is highlighted to confirm. Once the full 4 digits have been entered, move to OK on the display panel and press the button to confirm. Once the PIN number has been entered correctly, the main USER function sub-menu will be shown.
The below icons displayed on the screen take you to the following functions:
ENABLE / DISABLE functions Change PIN Upper temperature limit Lower temperature limit
  • Enable / Disable functions
To access the Enable/Disable function, ensure the icon is highlighted in the 'Program' sub-menu and press the button to access.
Use the and buttons to move up and down respectively to select ON to enable or OFF to disable. Once the desired option is highlighted press the button to confirm. Use the button to go back to the main display panel or leave for 30 seconds without pressing any buttons.
On the main screen you will see the icon in AUTOMATIC function, the icon in MANUAL function and when in PILOT WIRE* function.
*PILOT WIRE function not available in UK. Only upon demand.*
  • Change PIN code
To change the PIN code of your product, ensure the icon is highlighted in the 'Program' sub-menu and press the button to confirm.
Use the and and and buttons to move left, right, up or down to select the new numbers, pressing after each number is highlighted to confirm.
Then move to OK on the display panel and press the button to confirm. The screen will show PIN CHANGED.
Please remember your new PIN code for the future and store in a safe place. In order to access the USER function menu again you will need your new PIN code.
  • Upper temperature limit
To set the upper temperature limit of your product ensure the icon is highlighted in the 'Program' sub-menu and press the button to access.
Use the and buttons to decrease or increase your desired upper temperature between 19ºC to 30ºC and press the button to confirm. You will then return to the USER function screen. To exit press the button to go back to the main display panel or leave for 30 seconds.
  • Lower temperature limit
To set the lower temperature limit of your product ensure the icon is highlighted in the 'Program' sub-menu and press the button to access.
Use the and buttons to decrease or increase your desired lower working temperature between 7.5ºC to 18.5ºC and press the button to confirm. You will then return to the USER function screen. To exit press the button to go back to the main display panel or leave for 30 seconds without pressing any buttons..

PILOT WIRE FUNCTION

The PILOT WIRE function allows you to control your heating only via the pilot wire controller.
Activate or deactivate the pilot wire control function. Use the and, keys, select ON to activate and OFF to deactivate. Press to confirm and exit. The main display will show.

FUZZY LOGIC ENERGY CONTROL TECHNOLOGY
This product includes FUZZY LOGIC ENERGY CONTROL technology, which manages the product's energy consumption in the most efficient way. FUZZY LOGIC ENERGY CONTROL is a technology that bases its operation on the generation of thousands of micro cuts in the energy consumption of the heating element to keep the water temperature stable with minimum consumption.
When the symbol replaces the symbol , then FUZZY LOGIC ENERGY CONTROL technology is in operation.

WI-FI PAIRING

To pair the device you must first create a zone in the application. Once inside this zone, press the icon to start the pairing wizard. If you need more information, you can consult the complete installation manual from the following QR code:

MAINTENANCE AND CLEANING

The product does not require any maintenance. We recommend cleaning the product (back, bottom of the product, etc.). Do not use abrasive substances on the product, clean it with a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any cleaning operation, make sure that the product is switched off and at room temperature.

GENERAL WARNINGS


This product may be used by children over 8 years of age and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge under strict supervision or instruction in the safe use of the product and if they understand the hazards involved. Children should not plug, adjust, clean, play with, or perform maintenance on this product. Children under 3 years of age should be kept away from this product unless supervised.
DO NOT use the product in enclosed spaces if the persons present cannot leave the room independently and are not under constant supervision.
DO NOT COVER. To avoid overheating, do not cover the radiator.
DO NOT place spray cans, volatile substances, or similar objects within 250mm of the product.
DO NOT use insecticides, paints, or chemicals on or near the product.
burn hazardSome parts of this product could reach high temperatures and cause burns. DO NOT touch the external parts of the product when in operation.
DO NOT install near curtains or other flammable materials.
Particular attention should be paid when children and vulnerable people are present.
When using electrical appliances, precautions should be taken to reduce the risk of fire, electric shock and injury. Never insert fingers, body parts or objects inside the product.
Make sure that the voltage indicated on the product's technical information corresponds to the voltage output you have at your socket.
Any repair or maintenance that requires the product to be opened the product must be carried out by personnel authorised by ROINTE, who must also be notified if a leak is observed. Only official spare parts approved by ROINTE should be used. Please observe the current and relevant regulations when disposing of this product and its thermal fluid.
If the power cable is damaged, it must be replaced by personnel authorised by ROINTE to prevent any damage.
To avoid the risk of suffocation, do not leave the packaging including bags and other items within reach of babies or children.
The product has an IP24 degree of protection and can be used in bathrooms, but not in the vicinity of bathtubs, taps, showers, water connections, toilets, swimming pools or other masses of water. The product must never be installed where it, the switches or the control panel are within the reach of people in the water. Never use the product with wet hands. Do not place any water containers (glasses, vases, etc.) on or near the product.

  • Disconnect the product from the power supply and make sure the product is at room temperature before any cleaning or maintenance. Do not use any abrasive substances on the product, such as (but not limited to) chemicals, coarse cloths, brushes, hard bristle, or wire/steel wool.
  • To disconnect the product from the power source, remove the mains plug from the socket. Do not pull on the cable.
  • ROINTE cannot be held responsible for incorrect sizing of the product unless it has been followed by an official ROINTE technical study.
  • Before the first start-up, or before the start of winter, or when the product has not been used for many days, the appliance should be cleaned (follow the steps in the "maintenance" section of this manual).
  • Do not sit or lean on the product.
  • Temperature contrasts can generate "clicks" or noises in the device. This is not a fault of the product, but due to the expansion/contraction of the materials.
  • When disposing of the product, the requirements set out in the legislation for the waste treatment and recycling must be followed. See WEEE.

TECHNICAL INFORMATION

TECHNICAL INFORMATION

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Rointe D Series, 0330RAD, 0550RAD, 0770RAD Manual

Advertisement

Need help?

Need help?

Do you have a question about the D Series and is the answer not in the manual?

Questions and answers

Table of Contents