Page 1
Drift Grab Rails Installation Instructions This product must be fitted to a solid wall or suitably reinforced wall framing structure in order to meet 1100N force requirement of AS 1428.1. Fixings provided are for use with solid walls only. It is the installers responsibility to ensure correct fixings are used with any other wall type.
Page 2
Drift Grab Rails Installation Check wall surface is flat and free from contaminants. Wet rail and slide back cover with seal to expose the mounting plate. Place grab rail on wall and mark location of screw holes. Drill holes and insert wall plugs provided. Using stainless steel screws provided, fasten until screws are fully engaged and mount plate is firm to the wall.
Need help?
Do you have a question about the Mizu Series and is the answer not in the manual?
Questions and answers