Table of Contents
Advertisement
Quick Links
METHVEN
SATINJET ESCAPE MKII
HI RISE SHOWER
SPECIFICATIONS
Recommended Use
Colour
Pressure Rating
Temperature Rating
Suitable Hot Water
Units
WELS
Standards
Spray Patterns
The more
stars the more
water efficient
WATER RATING
www.waterrating.gov.au
9.0
litres per
minute
In accordance with AS/NZS 6400
Licence No. 0095
Methven Australia Pty Ltd
AS3662
WMKT21090
Variabl e
Ellipse
62 x 80
Domestic, hotel and commercial
Chrome with satin chrome face
Chrome with white face
Suitable for high pressure applications and has
been WELS certified to the following:
Minimum operating pressure 150kPa
Maximum operating pressure 500kPa
Maximum continous working temperature 70˚C
(recommended 38˚C - 42˚C)
Minimum 1˚C
Storage Tank: Yes
Continous Flow: Yes
Gravity Feed: Not recommended
Stars: 3
Flow rate: 9L/min
AS/NZS 3662
Standard Satinjet; Massage
Cleaning RECOMMENDATIONS
This bathroom product should not be cleaned with abrasive materials eg.
steel wool/scourers. Do not use any corrosive or abrasive cleaning agents
containing acids or scouring agents. Bleaches can also discolour products
and therefore should not be used. Damage caused by any improper
treatment is not covered by the product warranty- refer to Warranty
Conditions on the last page.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
To see the full METHVEN range at Reece go to
www.reece.com.au/bathrooms
page 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Reece METHVEN SATINJET ESCAPE MKII
Summary of Contents for Reece METHVEN SATINJET ESCAPE MKII
- Page 1 Gravity Feed: Not recommended Stars: 3 WELS Flow rate: 9L/min Standards AS/NZS 3662 To see the full METHVEN range at Reece go to Spray Patterns Standard Satinjet; Massage www.reece.com.au/bathrooms CLEANING RECOMMENDATIONS This bathroom product should not be cleaned with abrasive materials eg.
- Page 2 page 2 of 3 METHVEN SATINJET ESCAPE MKII HI RISE SHOWER INSTALLATION INSTRUCTIONS NOTE FOR SHOWER HEAD ONLY INSTALLATIONS - use step 2 onwards. Apply plumbing tape to pipe. Screw arm onto pipe ensuring that the arm ends in the correct position. Remove cap from shower head if tted.
- Page 3 You have purchased a quality product from Reece Pty Ltd • Inadequate or complete lack of maintenance ABN 84 004 097 090 (“Reece”). This product is covered by a • Chemical, electrochemical or electrical influences Lifetime replacement product warranty, including spare parts, •...
Need help?
Do you have a question about the METHVEN SATINJET ESCAPE MKII and is the answer not in the manual?
Questions and answers