Table of Contents
Advertisement
Quick Links
US101 RZ/G2
Quick Start Guide
Contents
1.
Document Description ............................................................................................................. 2
2.
Package Contents ................................................................................................................... 2
2.1
Package contents .................................................................................................................................... 2
2.2
Additional Items for developing application software .............................................................................. 2
3.
Interfaces and Setup Diagram ................................................................................................. 2
3.1
Opening TTY Serial port in Linux machine ............................................................................................. 3
3.2
Opening Serial port in Windows machine ............................................................................................... 4
4.
Device Specific Items .............................................................................................................. 6
4.1
Connecting to access point mode ........................................................................................................... 6
4.2
Setup station mode.................................................................................................................................. 7
4.3
Setup Bluetooth ....................................................................................................................................... 8
4.4
Display ON/OFF ...................................................................................................................................... 9
4.5
4k video playback .................................................................................................................................... 9
As shown below, click on the 4k icon to view the 4k video. .............................................................................. 9
4.6
Wayland terminal ................................................................................................................................... 10
4.7
Display camera video on HDMI ............................................................................................................. 10
5.
SDK Installation ................................................................................................................ 11
6.
Cross Compiling C application ..................................................................................... 11
Revision History ............................................................................................................................ 11
Revision 0.1
January 2021
US101 - Quick Start Guide
Page 1 of 12
Advertisement
Table of Contents
Related Manuals for Renesas US101 RZ/G2
Summary of Contents for Renesas US101 RZ/G2
-
Page 1: Table Of Contents
US101 - Quick Start Guide US101 RZ/G2 Quick Start Guide Contents Document Description ......................2 Package Contents ........................2 Package contents ............................ 2 Additional Items for developing application software ................2 Interfaces and Setup Diagram ....................2 Opening TTY Serial port in Linux machine ..................... 3 Opening Serial port in Windows machine .................... -
Page 2: Document Description
US101 Quick Start Guide 1. Document Description This document provides following information for RZ/G2-M SMARC SOM DEMO PLATFORM: - 1. It describes and illustrates the following a. Features of RZ/G2-M SMARC SOM DEMO PLATFORM. b. Hardware connection method of various interfaces of RZ/G2-M SMARC SOM DEMO PLATFORM 2. -
Page 3: Opening Tty Serial Port In Linux Machine
US101 Quick Start Guide • Before powering ON the board make sure that Camera, HDMI, LCD are connected properly. • Connect micro USB cable to HOST PC from Debug Connector. 3.1 Opening TTY Serial port in Linux machine Type below commands in the host PC to set up serial port for debug console. •... -
Page 4: Opening Serial Port In Windows Machine
US101 Quick Start Guide • After making changes, select save set up as..RZG2M and then select Exit. • Connect Power cable to RZ/G2-M SMARC SOM DEMO PLATFORM Board and turn it ON. Note: Serial port setup should be done only for the first boot. For further boot-up via serial port enter the below command sudo minicom RZG2M 3.2 Opening Serial port in Windows machine... - Page 5 US101 Quick Start Guide • Connect micro USB cable to HOST PC from Debug Connector and power ON the board. • Open tera term and select serial. Use the COM port of USB-SERIAL CH340 as shown in the figure below. •...
-
Page 6: Device Specific Items
US101 Quick Start Guide Note: Every time the tera term is launched, make sure that speed is set to 115200. 4. Device Specific Items • Once the board boots up, to login, type root and press enter as shown below. 4.1 Connecting to access point mode Access point is enabled on bootup. -
Page 7: Setup Station Mode
US101 Quick Start Guide After HOST PC gets connected to Relysys_G2M_AP or Relysys_G2N_AP, you can ssh using the below – ssh root@192.168.20.1 4.2 Setup station mode • Add ssid and psk before starting the station mode service. • Go to vi /etc/wpa_supplicant.conf and add your router’s ssid and password in place of xxxx and yyyy respectively. -
Page 8: Setup Bluetooth
US101 Quick Start Guide • ifconfig gives mlan0 ip address as shown below. Now, board is connected to the internet via mlan0. 4.3 Setup Bluetooth • Type the below command for scanning the bluetooth devices - hcitool scan Note: The ◦... -
Page 9: Display On/Off
US101 Quick Start Guide 4.4 Display ON/OFF • Run the below script to turn the HDMI ON or OFF respectively - /opt/relysys/Lvds_Hdmi_Selection.sh hdmi on /opt/relysys/Lvds_Hdmi_Selection.sh hdmi off • Run the below script to turn the LVDS touchscreen ON or OFF respectively - /opt/relysys/Lvds_Hdmi_Selection.sh lvds on /opt/relysys/Lvds_Hdmi_Selection.sh lvds off Note: Turn off the HDMI for the touch to work properly on LVDS. -
Page 10: Wayland Terminal
US101 Quick Start Guide 4.6 Wayland terminal Connect a keyboard and a mouse to the board and then click on the terminal icon to access the wayland terminal, so that you can interact with the board without host PC. 4.7 Display camera video on HDMI •... -
Page 11: Sdk Installation
US101 Quick Start Guide saveenv run bootcmd • After bootup, run the below script to display both the cameras simultaneously – /opt/relysys/camera2.sh SDK Installation • SDK needs to be installed on a PC running Linux Ubuntu 16.04 to develop any application and run on RZ/G2 SMARC SOM DEMO PLATFORM. - Page 12 US101 Quick Start Guide Revision 0.1 Page 12 of 12 January 2021...
-
Page 13: General Precautions In The Handling Of Microprocessing Unit And Microcontroller Unit Products
Unit Products The following usage notes are applicable to all Microprocessing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products. -
Page 14: Corporate Headquarters
Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
Need help?
Do you have a question about the US101 RZ/G2 and is the answer not in the manual?
Questions and answers