Related Manuals for SIGMATEK HGT 1035
Summary of Contents for SIGMATEK HGT 1035
- Page 1 HGT 1035 Handheld Operating Panel Instruction Manual Date of creation: 10.12.2013 Version date: 07.06.2024 Article number: 01-245-1035-E...
- Page 2 (print, photocopy, microfilm, or in any other process) without express permission. We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible for technical or printing errors in this handbook and assumes no responsibility for damages that occur through its...
- Page 3 HGT 1035 10.4“ Handheld Operating Panel HGT 1035 The HGT 1035 is an intelligent handheld operating panel used for programming and visual- ization of automated processes. Process diagnostics, operating and monitoring of process- es are thereby simplified. A touch screen serves as the input medium for process data and parameters. The output is shown on a 10.4"...
-
Page 4: Table Of Contents
10.4“ HANDHELD OPERATING PANEL HGT 1035 Table of Contents Essential Components ............5 Introduction ................6 Target Group/Purpose of this Manual ........6 Important Reference Documentation ......... 6 Contents of Delivery ..............6 Basic Safety Guidelines ............7 Symbols Used ................7 Disclaimer .................. - Page 5 10.4“ HANDHELD OPERATING PANEL HGT 1035 Technical Data ............... 17 Performance Data ............... 17 Electrical Requirements ............. 18 Terminal ..................18 Environmental Conditions ............19 Display ..................19 Terminal Requirements .............. 20 Miscellaneous ................20 Mechanical Dimensions ............21 Wall Mount ................... 22 Interfaces ................
- Page 6 10.4“ HANDHELD OPERATING PANEL HGT 1035 11 Transport/Storage ..............31 12 Storage ...................31 13 Maintenance ................32 13.1 Cleaning and Disinfection of the Touchscreen ....... 32 13.2 Service ..................33 13.3 Repair ................... 33 14 Storage Media ................34 15 Wall Mount Accessory............35 15.1...
-
Page 7: Essential Components
10.4“ HANDHELD OPERATING PANEL HGT 1035 Essential Components • 10.4" XGA TFT color display with backlighting • 10.4" Touchscreen • Confirmation switch (mounted on the rear side), 2-channel configuration • Key switch (mounted top-center), two channel wiring. • Emergency stop button (mounted top-center), two channel wiring. -
Page 8: Introduction
Please see our website for our hotline number and business hours. Important Reference Documentation • Safety System Handbook • Operating Panel Connection Cables This and additional documents can be downloaded from our website or obtained through support. Contents of Delivery 1x HGT 1035 Page 6 07.06.2024... -
Page 9: Basic Safety Guidelines
10.4“ HANDHELD OPERATING PANEL HGT 1035 Basic Safety Guidelines Symbols Used The following symbols are used in the operator documentation for warning and danger messages, as well as informational notes: DANGER Danger indicates that death or serious injury will occur, if the specified measures are not taken. - Page 10 10.4“ HANDHELD OPERATING PANEL HGT 1035 Danger for ESD-sensitive components. Les signes de danger pour les composants sensibles aux décharges élec- trostatiques. Page 8 07.06.2024...
-
Page 11: Disclaimer
Please thoroughly read the corresponding documentation and this operat- ing manual before handling a product. SIGMATEK GmbH & Co KG is not liable for damages caused through non-compliance with these instructions or applicable regulations. 07.06.2024... -
Page 12: General Safety Guidelines
2006/42/EG guidelines is correct. As long as the machine with which the product should be used does not comply with the guideline, op- erating this product is prohibited. Operate the unit with devices and accessories approved by SIGMATEK only. Page 10... - Page 13 10.4“ HANDHELD OPERATING PANEL HGT 1035 CAUTION Handle the device with care and do not drop or let fall. Prevent foreign bodies and fluids from entering the device. The device must not be opened, otherwise it could be damaged! If the device does not function as properly or is damaged in a way that could pose a hazard, it must no longer be used! Regularly check the housing for mechanical damage.
-
Page 14: Designated Use
10.4“ HANDHELD OPERATING PANEL HGT 1035 Designated Use The Safety functions implemented in the product are designed for use with safety applica- tions in a PLC control and meet the required conditions for safe operation in compliance with SIL 3, HFT 1 according to EN IEC 62061 and in compliance with PL e. Cat. 4 in ac- cordance with EN ISO 13849-1. -
Page 15: Software/Training
10.4“ HANDHELD OPERATING PANEL HGT 1035 Software/Training The application is created with the software LASAL CLASS 2 and LASAL SCREEN Editor, the safety application is created using the LASAL SAFETYDesigner. Basic safety infor- mation (functional safety) can be found in the Safety System Handbook. -
Page 16: Norms And Guidelines
10.4“ HANDHELD OPERATING PANEL HGT 1035 Norms and Guidelines Residual Risks In the system integrator’s risk analysis, the following residual risks must be CAUTION taken into consideration for the product: • Release of environmentally harmful substances, emissions and undesired temperatures •... -
Page 17: Functional Safety Standards
EN ISO 13850 Safety of machines - Emergency stop function - design principles 4.4.2 EU Conformity Declaration EU Conformity Declaration The HGT 1035 conforms to the following European guidelines: • 2006/42/EG Machine Guideline • 2014/30/EU Electromagnetic Compatibility (EMC guideline) •... -
Page 18: Safety-Relevant Parameters
10.4“ HANDHELD OPERATING PANEL HGT 1035 Safety-Relevant Parameters The use of the specified parameters requires a risk analysis of the end application. Input Module Safety Ratings (SIL 3, HFT 1, PL e / Cat. 4) HGT 1035 PFH = 1.1E-11 (1/h) -
Page 19: Technical Data
4 Gbyte is not allowed and will result in a massive reduction of the microSD card's lifetime. The Safety interface must be used exclusively with the SIGMATEK SCP XXX! The status of the Safety-related inputs (confirmation, key, emergency stop switches) is sent to the SCP XXX. -
Page 20: Electrical Requirements
10.4“ HANDHELD OPERATING PANEL HGT 1035 Electrical Requirements Supply voltage typically +24 V DC (PELV) minimum +24 V DC (PELV) maximum +30 V DC (PELV) Supply voltage (UL) +24-30 V DC (NEC Class 2 or LVLC) Current consumption typically 0.5 A typically 0.6... -
Page 21: Environmental Conditions
10.4“ HANDHELD OPERATING PANEL HGT 1035 Environmental Conditions Storage temperature -10 ... +60 °C 0 … +50 °C Environmental temperature Humidity 10-95 %, non-condensing Operating conditions pollution degree 2 altitude up to 2000 m ≤ 70 dB Noise emissions EMC stability... -
Page 22: Terminal Requirements
10.4“ HANDHELD OPERATING PANEL HGT 1035 Terminal Requirements Connection technology M16 plug (see X2 on page 24) Special connector cable minimum bend radius: 147 mm Miscellaneous Article number 01-245-1035 Connector cable optionally available (see documentation Connection Cables for Operating Devices) -
Page 23: Mechanical Dimensions
10.4“ HANDHELD OPERATING PANEL HGT 1035 Mechanical Dimensions 07.06.2024 Page 21... -
Page 24: Wall Mount
10.4“ HANDHELD OPERATING PANEL HGT 1035 Wall Mount Page 22 07.06.2024... -
Page 25: Interfaces
10.4“ HANDHELD OPERATING PANEL HGT 1035 Interfaces Rear Connectors X1: USB interface 2.0 type A Function +5 V It should be noted that many of the USB devices on the market do not comply with USB specifications; this can lead to device malfunctions. This may cause the device to malfunction. - Page 26 10.4“ HANDHELD OPERATING PANEL HGT 1035 X2: Cable Connector M16 Wire Color Function Yellow Safety interface H Green Safety interface L Black Safety interface shield +24 V DC Black shield ETH shield White ETH_Tx+ VAR_Rx+ Blue VAR_Rx- Pink VAR_Tx+ Gray...
-
Page 27: Key Switch
10.4“ HANDHELD OPERATING PANEL HGT 1035 Key Switch The key switch is two-stage and read via the SCP XXX connected to the Safety interface. In the SCP XXX the "HBG0811_K" module is used; inputs 5 and 6 are assigned to the key switch. -
Page 28: Confirmation Switch
“HBG0811_K" module is used and inputs 1 and 2 are used for the confirmation switch. With the “HGT1035" hardware class, it is possible among other things, to evaluate the Safety number of the connected SCP XXX on the HGT 1035. Page 26... -
Page 29: Emergency Stop
10.4“ HANDHELD OPERATING PANEL HGT 1035 Emergency Stop The Emergency Stop is two-stage. In the SCP XXX, the “HBG0811_K" module is with the inputs 3 and 4. 07.06.2024 Page 27... -
Page 30: Assembly/Installation
10.4“ HANDHELD OPERATING PANEL HGT 1035 Assembly/Installation Check Contents of Delivery Ensure that the contents of the delivery are complete and intact. See chapter 2.3Contents of Delivery for more information. On receipt and before initial use, check the device for damage. If the device is damaged, contact our customer service and do not install the device in your system. -
Page 31: Wiring
10.4“ HANDHELD OPERATING PANEL HGT 1035 10 Wiring 10.1 ESD Protection The operator must ensure that no ESD disturbances affect the product. 10.2 USB Interface The handheld operating panel has a USB interface. This interface has a USB interface connection that can be used to connect various USB devices (keyboard, mouse, storage media, hubs, etc.). -
Page 32: Recommended Cable Shielding
10.4“ HANDHELD OPERATING PANEL HGT 1035 10.3 Recommended Cable Shielding For applications in which the bus is operated outside the control cabinet, the correct shield- ing is required. Especially when for structural reasons, the bus line must be placed next to sources of strong electromagnetic interference. -
Page 33: Transport/Storage
10.4“ HANDHELD OPERATING PANEL HGT 1035 11 Transport/Storage This device contains sensitive electronics. During transport and storage, high mechanical stress must therefore be avoided. For storage and transport, the same values for humidity and vibration as for operation must be maintained! During transport, temperature and humidity fluctuations may occur. -
Page 34: Maintenance
10.4“ HANDHELD OPERATING PANEL HGT 1035 13 Maintenance During maintenance and service, observe the safety guidelines in Chapter 13.1 Cleaning and Disinfection of the Touchscreen CAUTION Before cleaning and disinfecting the touch screen, the ETV must be turned off in order to prevent triggering functions or commands unintentionally! The touch screen can only be cleaned with a soft, damp cloth. -
Page 35: Service
10.4“ HANDHELD OPERATING PANEL HGT 1035 13.2 Service This product was constructed for low-maintenance operation. 13.3 Repair In the event of a defect/repair, send the panel with a detailed error descrip- tion to the address listed at the beginning of this document. -
Page 36: Storage Media
10.4“ HANDHELD OPERATING PANEL HGT 1035 14 Storage Media It is recommended that only storage media provided by SIGMATEK (Com- pactFlash cards, microSD cards etc.) be used. The number of read and write actions have a significant influence on the lifespan of the storage media. -
Page 37: Wall Mount Accessory
10.4“ HANDHELD OPERATING PANEL HGT 1035 15 Wall Mount Accessory The appropriate wall mount is available at SIGMATEK under the article number 01-245-1035-Z2. 07.06.2024 Page 35... -
Page 38: Mechanical Dimensions
10.4“ HANDHELD OPERATING PANEL HGT 1035 15.1 Mechanical Dimensions Page 36 07.06.2024... -
Page 39: Disposal
10.4“ HANDHELD OPERATING PANEL HGT 1035 16 Disposal Should you need to dispose of the device, the national elec- tronic waste regulations must be observed. The device appliance must not be disposed of as household waste. 07.06.2024 Page 37... -
Page 40: Documentation Changes
10.4“ HANDHELD OPERATING PANEL HGT 1035 Documentation Changes Change Affected Chapter Note date page(s) 29.09.2014 3.2 Electrical requirements Supply voltage (UL) and note added in grey box Standards added 3.7 Miscellaneous 29.12.2014 4.1 Wall Mount Wall mounting added 09.03.2015 8. Wall Mount Accessories Wall Mount Accessories newly added 12.03.2015... - Page 41 10.4“ HANDHELD OPERATING PANEL HGT 1035 16.08.2018 3.1 Performance Data Note corrected 17.12.2019 10.1 Connection from the Graphic expanded Control Cabinet 08.09.2020 3.2 Electrical Requirements Protection class added 3.4 Environmental Conditions For protection type (only with all protective caps in place) added 18.11.2020...
- Page 42 10.4“ HANDHELD OPERATING PANEL HGT 1035 Page 40 07.06.2024...
Need help?
Do you have a question about the HGT 1035 and is the answer not in the manual?
Questions and answers