Subscribe to Our Youtube Channel
Related Manuals for SIGMATEK HBG 1011
Summary of Contents for SIGMATEK HBG 1011
- Page 1 HBG 1011 Handheld Control Panel Date of creation: 06.09.2013 Version date: 16.08.2018 Article number: 12-245-1011-E...
- Page 2 (print, photocopy, microfilm or in any other process) without the express permission. We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsi- ble for technical or printing errors in the handbook and assumes no responsibility for damages that occur through...
- Page 3 HBG 1011 10.4“ Handheld Control Panel HBG 1011 The HBG 1011 is a handheld control panel for visualizing processes. Process diagnosis, operating and monitoring functions are therewith simplified. A touch screen serves as the input medium for process data and parameters.
-
Page 4: Table Of Contents
10.4“ HANDHELD CONTROL PANEL HBG 1011 Contents Essential Components ............4 Basic Safety Guidelines ............5 Symbols Used ................5 General Safety Guidelines ............7 Designated Use ................8 Residual Risks ................11 Safety of the Machine or Equipment ........12 Conformity with EU Standards .......... - Page 5 10.4“ HANDHELD CONTROL PANEL HBG 1011 Rear Connectors ................. 20 Key Switch ................... 22 Confirmation Switch ..............22 Emergency Stop................23 Wiring Guidelines ..............24 ESD Protection ................24 USB Interface Connections ............24 Cleaning the Touch Screen ..........25 Recommended Cable Shielding ...........
-
Page 6: Essential Components
10.4“ HANDHELD CONTROL PANEL HBG 1011 Essential Components • 10.4" XGA TFT color display with backlighting • 10.4" Touch screen • Confirmation switch (mounted on the rear side), 2-channel configuration • Key switch (mounted top center), 2-channel, wired in series with the confirmation switch •... -
Page 7: Basic Safety Guidelines
10.4“ HANDHELD CONTROL PANEL HBG 1011 Basic Safety Guidelines Symbols Used For warning, danger messages and informational notes, the following symbols are used in the operator documentation: DANGER DANGER Identifies an immediate danger with high risk, which can lead to immediate death or serious injury if not avoided. - Page 8 10.4“ HANDHELD CONTROL PANEL HBG 1011 This symbol identifies important or additional infor- mation regarding the operation of the safety modules. Ce symbole indique des informations importantes ou supplémentaires concernant le fonctionnement des modules de sécurité particuliers. INFORMATION Provides user tips, informs of special features and identifies especially important information in the text.
-
Page 9: General Safety Guidelines
The technical documentation should be included in the sale, rental or transfer of the product. Please read the corresponding data sheets and operating instructions thor- oughly before handling Safety modules. SIGMATEK is not liable for damages caused through non-compliance with these instructions or respective the regulations. -
Page 10: Designated Use
10.4“ HANDHELD CONTROL PANEL HBG 1011 Designated Use The Safety functions implemented in the Safety modules are designed for use with safety- related applications in a PLC control and meet the required conditions for safe operation in SIL 3 or SIL CL 3 according to EN 62061 and in compliance with PL e. Cat. 4 in accordance with EN ISO 13849-1. - Page 11 10.4“ HANDHELD CONTROL PANEL HBG 1011 For your own safety and the safety of others, the safety modules should be used for their designated purpose only. Correct EMC installation is also included in the designated use. Utilisez les modules de sécurité pour votre sécurité et celle des autres uniquement d’une façon appropriée.
- Page 12 10.4“ HANDHELD CONTROL PANEL HBG 1011 In addition, the Safety Guidelines in the other sections of these instruc- tions must be observed. These instructions are visibly emphasized by symbol. Veillez à bien respecter les consignes de sécurité dans les autres sec- tions de ce manuel.
-
Page 13: Residual Risks
10.4“ HANDHELD CONTROL PANEL HBG 1011 Residual Risks In the risk assessment defined by the 2006/42/EG guideline (machine guideline), the machine manufacturer must include the possible resid- ual risks posed by Safety modules. These include: Unwanted movements of driven machine components Unwanted temperatures, emissions of gas, particles, smell and light. -
Page 14: Safety Of The Machine Or Equipment
10.4“ HANDHELD CONTROL PANEL HBG 1011 Safety of the Machine or Equipment Strict compliance with the safety guidelines is required, otherwise all warranties and claims are invalid: Observe all on-site rules and regulations for accident prevention and occupa- tional safety. -
Page 15: Safety-Relevant Parameters
10.4“ HANDHELD CONTROL PANEL HBG 1011 Safety-relevant Parameters The use of the specified parameters requires a risk analysis of the end application. Input module Safety parameters (*) HBG 1011 = 1.07E-11 (1/h) Including Safe CPU (SCP XXX) MTTF = 306 years DC = 99.9 %... -
Page 16: Technical Data
Display 10.4" TFT color display 1024 x 768 RGB The Safety Interface must be used exclusively with the SIGMATEK SCP XXX! The status of the safety-related inputs (confirmation switch, key switch, emergency stop switch) is sent to the SCP XXX. -
Page 17: Electrical Requirements
10.4“ HANDHELD CONTROL PANEL HBG 1011 Electrical Requirements Supply voltage typically +24 V DC (PELV) minimum +24 V DC (PELV) maximum +30 V DC (PELV) Supply voltage (UL) +24-30 V DC (NEC Class 2 or LVLC) Current consumption typically 550 mA... -
Page 18: Display
10.4“ HANDHELD CONTROL PANEL HBG 1011 Display 10.4” TFT LCD color display Type Resolution XGA 1024 x 768 Pixel Color depth 18-bit RGB (262K colors) LCD mode normal black LCD Polarizer transmissive Pixel size 0.0685 mm x 0.2055 mm Backlighting... -
Page 19: Miscellaneous
10.4“ HANDHELD CONTROL PANEL HBG 1011 Miscellaneous Article number 12-245-1011 Hardware version Software version Connector cable optionally available (see documentation for connection cables for operating devices) Standard UL 508 (E247993) Approvals CE, TÜV EC type tested, On HMI-Link extenders with SW version 1.x, HMI-Link display units/control panels with SW version 1.x must be used. -
Page 20: Mechanical Dimensions
10.4“ HANDHELD CONTROL PANEL HBG 1011 Mechanical Dimensions In mm Page 18 16.08.2018... -
Page 21: Wall Mounting
10.4“ HANDHELD CONTROL PANEL HBG 1011 Wall Mounting 16.08.2018 Page 19... -
Page 22: Interfaces
10.4“ HANDHELD CONTROL PANEL HBG 1011 Interfaces Rear Connectors X1: USB Interface Connections 2.0 Function +5 V It should be noted that many of the USB devices on the market do not comply with USB specifications; this can lead to device malfunctions. It is also possible that these devices will not be detected at the USB port or function correctly. - Page 23 As required by EN ISO 13850, section 4.1 and EN 60204-1, section 10.7.1, it must be impossible to confuse a functioning handheld control panel with a non-functioning one. Note on the Emergency Stop function: A non-connected HBG 1011 does not have to be visibly sealed! LED status...
-
Page 24: Key Switch
10.4“ HANDHELD CONTROL PANEL HBG 1011 Key Switch The key switch is two-stage and read via the SCP XXX connected to the Safety Interface. In the SCP XXX, the "HGB0811_K class is used; inputs 5 and 6 are assigned to the key switch. -
Page 25: Emergency Stop
10.4“ HANDHELD CONTROL PANEL HBG 1011 Emergency Stop The Emergency stop is 2-channel. In the SCP XXX, the "HBG 0811" module is used with the inputs 3 and 4. 16.08.2018 Page 23... -
Page 26: Wiring Guidelines
10.4“ HANDHELD CONTROL PANEL HBG 1011 Wiring Guidelines ESD Protection Typically, USB devices (keyboard, mouse...) are not equipped with shielded cables. These devices are disrupted by ESD and in some instances, no longer function. Before any device is connected to, or disconnected from the terminal, the potential should be equalized (by touching the control cabinet or earth terminal). -
Page 27: Cleaning The Touch Screen
10.4“ HANDHELD CONTROL PANEL HBG 1011 Cleaning the Touch Screen CAUTION! Before cleaning the touch screen, the HBG must be turned off in order to prevent triggering functions or commands unintentionally! The HBG touch screen can only be cleaned using a soft damp cloth. To dampen the cloth, a screen cleaning solution such as antistatic foam cleaner, water with detergent or alcohol is recommended. -
Page 28: Recommended Cable Shielding
10.4“ HANDHELD CONTROL PANEL HBG 1011 Recommended Cable Shielding For applications in which the bus is operated outside the control cabinet, the correct shield- ing is required. This is especially important, if due to physical requirements, the bus cables must be placed next to sources of strong electromagnetic noise. It is recommended that wiring the connector cable in parallel with power cables be avoided whenever possible. - Page 29 10.4“ HANDHELD CONTROL PANEL HBG 1011 Documentation Changes Change Affected Chapter Note date page(s) 18.02.2014 Added Supply Voltage (UL) at Electrical Re- quirements table and grey notice below the table Miscellaneous table: Added Standard Added connector description of X3 29.12.2014 Added Wall Mounting 12.03.2015...
- Page 30 10.4“ HANDHELD CONTROL PANEL HBG 1011 Page 28 16.08.2018...
Need help?
Do you have a question about the HBG 1011 and is the answer not in the manual?
Questions and answers