Specifications - Aiwa CX-NA92 Operating Instructions Manual

<FM section>
Frequency range
Usable sensitivity (IHF)
Alternate channel selectivity
Signal-to-noise rstio
Harmonic distortion
Frequency response
Stereo separation
Antenna
<AM (MW) section>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise ratio
Antenna
87.5 MHz to 108 MHz
1.3 pV (75 ohms) 13.2 dBf
50 dB (i400 kHz)
70 dB (STEREO), 76 dB (MONO)
0.3 % (MONO), 1 kHz
0.5 % (STEREO, L-R), 1 kFlz
30 HZ to 15 kHz (+0.5 dB, -3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
NSX-330HE, E, K, NSX-A92HE:
AM 531 (530) kHz to 1,602 (1 ,71 O)
kHz
NSX-330LH, U, C, NSX-332U:
AM 530 (531) kHz to 1,710 (1 ,602)
kHz
350 pV/m
22 dB (9 kHz)
53dB(100 dB input)
Loop antenna
cLW section>(E and K models only)
Frequency range
144 kHz tO 290 kHz
Sensitivity 1,400 ~V/m
Antenna Loop antenna
<Timer section>
Progrsm timer
On-timer, capable of free setting
Sleep timer Capable of setting in 10-minute
increments, 120 minutes maximum
<Amplifier section>
Power output NSX-330LH, HE, NSX-A92HE: 40W
+ 40W (6 ohms, T.H.D. 10% 1 kHz)
NSX-330E: 30W + 30W (6 ohms,
T.H, D. 1% lkHz)
NSX-330K: 40W + 40W (6 ohms,
T.H.D. 10% 1kHz)
30W + 30W (6 ohms, T,H.D. 1% 1
kHz)
FTC RULE (NSX-330U, C,
NSX-332U)
30 watts per channel, Min.
RMS at 6 ohms, from 65 Hz to 15
kHz, with no more than 1
Y.
Total Harmonic Distortion
0.05% (15 W, 1 kHz, 6 ohms)
VI DEO/AUX: 150 mV (adjustable)
Harmonic distortion
Input sensitivity
cCassette deck section>
Track format
Frequency reeponse
Signal-to-noise ratio
Tape speed
Recording system
Erasure system
Motor
Heads
4 tracks, 2 channels
CrOz tape: 50 – 16,000 Hz
Normal tape: 50-15,000 Hz
60 dB (DOLBY NR ON, CrOz tape
peak level)
4.8 cm/sec. (17/.9ips)
AC bias
AC erase
DC servomotor x 1
Playback head x 1 (deck 1)
Recording/playback/erasure head x
1 (deck 2)
<CD player section>
Disc
Scanning method
Lseer
Rotation speed
Error correction
No. of channels
D-A conversion
Wow/flutter
Signal-to-noise ratio
Harmonic distortion
cSpeaker SX-N330>
Cabinet type
Speaker
Impedance
Music power
Output sound pressure level
Dimensions (W x H x D)
Weight
<General>
Power requirements
Power consumption
Compact disc
Non contact optical scanner (semi-
conductor laser applicabon)
Semiconductor li~ser (1 = 780 nm)
Approx. 500 rpm -200 rpm (CLV)
Cross Interleave, Reed Solomon
code
2 channels
16-bit Imear
Unmeasurable
90 dB (1 kHz, O dB)
0.05% (1 kHz, O dB)
3 way, bass reflex (Magnetism sealed
type)
130 mm (51/8 in.) cone type woofer
50 mm (2 in.) cone type tweeter
20 mm
('3/16 In.) Ceramic typf? super
tweeter
6 ohms
40 w
87 dBIWlm
180 x 302,5x 200 mm
(7'/8 X 12 X 77/8 kl.)
2.6 kg (5.7 Ibs.)
NSX-330LH, HE, NSX-A92HE:
AC 120 V/220 V/240 V, swltchable
50/60 HZ
NSX-330U, C, N!3X-332U:
AC 120 V/220 V --240 V, switchab[e
50/60 Hz
NSX-330E: AC 230 V, 50 HZ
NSX-330K: AC 240 V, 50 I-Iz
NSX-330LH, HE, NSX-A92: 85 W
NSX-330/332U: 80W
NSX-330E, K: 21 OW
NSX-330C: 100W
Dimensions (W x H x D) Center unit:
Weight
Accessories
.
260 x 302,5x 329,5 mm
(10'/4 x 12 x 13 m,)
System"
620 x 302.5 x 32!3.5 mm
(24'/2xl2xl3irl)
Center unit: 7.2 kg (15.8 Ibs.)
System: 12.4 kg (27,3 Ibs.)
FM feeder antenna(1)
AM loop antenna(1)
Remote control (1)
Specifications and external appearance are subject to change without
notice due to product improvement.
Dolby noise reduction manufactured under Ilcense from Dolby Laborato-
ries Licensing Corporabon.
"DOLBY" and the double-D symbol on are trademarks of Dolby Labora-
tories Licensing Corporation.
The word "BBE and the "BBE symbol" aretrademarksof BBE Sound. Inc.
Under license from BBE sound, Inc.
Note
Please check the laws on copyright relating to recordings from discs, radio
or external tape for the country in which the machme is being used.
49