Recording; To Stop Recording; To Pause Recording; Monitoring - Aiwa CX-NA92 Operating Instructions Manual

When recording from a CD or a tape, see also the
pages after 32.
To stop recording
Press the E button.
To pause recording
Press the II button.
To resume recording, press the II button again.
To start recording with the remote control
First press the REC button, and then press the
4 (play) bu{ton within 2
seconds.
Monitoring
During recording, the output volume and tone of
the speakers or headphones maybe freely varied
without affecting the level of the recording.
Usable tapes
Normal (type I) and CrOz(type II) tapes can be
recorded on.
The type of the tape is detected automatically
when you inserf it.
To erase a recording
It
is possible to create a blank tape by erasing a
recording.
1 Press the TAPE button,
2 Insert the tape you want to erase into deck 2.
3 Set the reverse mode and the recording direc-
tion.
4
Press the VIDEO/AUX button. (Turn off the
power of the external equipment connected to
the VIDEO/AUX jack.)
5 Press the RECORD button.
Note
When a tape without an erasure prevention tab is
inserted, the dubbing operation will not begin.
Para grabar de un disco compacto o una cinta,
Consulte Ias paginas posteriors a 32,
Para cesar la grabacion
Presione el bottm H
Para realizar una pausa en la grabacion
Presione el boton II
Para reanudar la grabacion, vuelva a presionar el
boton Il.
Para iniciar la grabacibn con el control remoto
Presione primero el bot6n REC, y
Iuego oprima
el
boton < (reproduction) poraproximadamente 2
segundos.
Monitoreo
Durante la grabacion, el volumen y el tono de
salida de Ios altavoces o auriculares pueden
cambiarse sin afectar el nivel de grabacion.
Cintas utilizable
Para grabar podra emplear cintas de tipo normal
(tipo I) y CrC)z (tipo 11),
El tipo de cinta se detectara autom~ticamente
cuando inserte un casete.
A.