CDN TA20 Manual

Perfect For
• Maintaining food-safe temperatures
in refrigerators or freezers
Easy To Use
• Dual progress display
• Audio/visual alert
Features
• Shatterproof
• 39"/1 m sensor cable
• ABS plastic
• Sliding mode switches: F/C; refrigerator/freezer;
alert on/off
• Temperature guide
• Velcro tabs secure case to outside surface
®
• Suction cup firmly attaches sensor to inside surface
• Battery and instructions included
Built-in sensor
Probe sensor
Suction cup firmly attaches
sensor to inside surface
Note: Remove sticker from display before use.
Note:
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Battery Installation
Battery is installed. Replace battery when LCD
becomes dim or alert level declines.
1. Open battery door in back by sliding in direction
2. Install 1.5V AAA battery observing polarity shown
3. Close battery door and push in opposite direction
Operating Instructions
1. Place the probe sensor well inside the refrigerator
2. Remove the protective papers from one side of
3. Determine where the case will be mounted to
ALERT appears when
audio/visual alert is ON
4. Select Fahrenheit or Celsius using sliding mode
5. Select Refrigerator or Freezer using sliding mode
Double-sided Velcro tabs
®
for easy outside mounting
6. Select audio/visual alert by sliding mode switch
7. Alert sounds and LED lights flash for 5 seconds
Refrigerator/Freezer Alarm
Signal sounds at 15° or 46°F/-9.5° or 8°C
In the following instructions, names of the control
of arrow and lift.
in compartment.
of arrow to lock.
or freezer in a central location by pressing suction
cup firmly against inside surface.
each of the Velcro tab pairs and adhere complete
®
pairs to rectangular areas on back of case.
the outside surface. Wipe the surface area clean,
remove the protective papers from opposite sides
of Velcro tab pairs, and adhere tabs to surface by
®
pressing firmly. Wait 15 minutes for adhesive to set
before removing case.
switch on side of case.
switch to the far left of the display.
to the immediate left of the display to the ON
position. ALERT appears on Refrigerator/Freezer
side of the dual display when audio/visual alert
is ON.
every minute when the internal temperature rises
above the safety zone.
Model: TA20
Audio/Visual