CDN ProAccurate DTQ450X Manual

Perfect For
• Thin cuts of meat, fish or poultry
Easy To Use
• 6 second response
• Data-hold
• Big digit
• Temperature guide on sheath
Features
• NSF Certified
®
• 1.5 mm thin tip
• 5"/12.7 cm stem
• Waterproof
• Shatterproof
• Food-safe ABS plastic with BioCote
• Stainless steel stem
• Field calibration
• On/off button
• Auto-off after 10 minutes
• Sheath can be used as handle extension
• Mounting: pocket clip
• Battery & instructions included
Note: Remove sticker from display before use.
Note:
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.

Battery Installation

The battery is installed. Replace battery when LCD
becomes dim.
1. Remove battery cover on the front with a coin.
2. Install one LR44 battery with positive (+) side up.
3. Replace the battery cover.

Operating Instructions

A. Temperature Measurement
1. Press the ON/OFF button to turn the
2. After use, press the ON/OFF button to turn
®
B. Temperature Scale
Press the °F/°C button to select temperature
reading in Fahrenheit or Celsius.
C. Data-Hold
Before withdrawing the DT450X from the food,
press the HOLD button. This will "hold" the
reading until pressed again. HOLD appears in the
upper right corner of the display.
D. Max Mode
Max Mode is always working behind the scenes,
continually storing the highest temperature.
1. Press the MAX button to display the highest
2. The display automatically returns to the
3. Press the MAX button for 3 seconds or more to
ProAccurate
®
-40 to +450°F/-40 to +230°C
In the following instructions, names of the control
DTQ450X on.
the DTQ450X off and conserve battery life.
The DTQ450X automatically turns off after
10 minutes of inactivity.
temperature. MAX appears on the display.
temperature mode after a few seconds.
clear the stored MAX value.
Model: DTQ450X
Thermometer