EBARA GSD Operation & Instruction Manual

Be sure to issue operation personnel with
copies of this manual.
EBARA Close Coupled End
Suction Motor
Pump - Model GSD.
Operation & Instruction
Manual
Thank you for choosing the EBARA Model GSD close coupled end suction volute pump.
EBARA takes every caution in manufacturing the product for safe use by the customer.
However, handling this pump in an inappropriate manner may reduce its functional capacity
and result in an accident.
This operation manual explains the proper procedures concerning the installation, operation,
and maintenance of the product. This manual should be read before the pump is installed,
initial start-up and conducting any operational and maintenance/inspections on the pump.
Installation personnel must provide copies of this manual to the customer's pump operation,
maintenance and inspection personnel. Keep this manual in a safe place where it can be
consulted at any time.
When your pump is delivered, check the following immediately.
1. The pump and accessories
a) Check that the pump is as ordered, by referring to the nameplate (Fig.1)
b) Confirm that no damage has occurred during transportation.
c) Check all nuts and bolts to confirm that they are not loose.
d) Confirm that all accessories have been delivered.
e) Remove pump protective covers from suction and discharge ports/flanges before installation
to pipework.
1
Introduction
To installation personnel