EPOMAKER RT100 - Keyboard Manual

Set-up Instruction

1. Please ensure the RT100 is connected in wired mode (with cable), the mode switch is set to USB, and Win/Mac is correctly chosen.
2. Download the Driver, install it. Then, right-click and run the driver as administrator.
   1. If the Driver is in Chinese, you can change the language here: ①→②→Choose English. (Please select English or Chinese, and not auto)
   3. If the mini-display display abnormally, (such as showing incorrect information, fuzzy image, or stuck on the wrong language),
      1. Push the mini display into the keyboard firmly or adjust the angles a bit until connection is proper.
      2. In the EPOMAKER Driver, updating the firmware at Support > Firmware > Upgrade.
      3. Please make sure the RT100 is the only keyboard connected to the computer during the firmware upgrading.
      4. The latest firmware version is V504-OledV505.
3. How to sync time (Screenshot credit: https://www.youtube.com/watch?v=XJ9-drqI9tc)
4. How to sync CPU (Screenshot credit: https://www.youtube.com/watch?v=XJ9-drqI9tc)
   1. Make sure to run the driver as administrator.
5. How to sync TEMP
   1. Tips: this feature is only available on EPOMAKER_setup_1.2.69 (WIN2023069) or higher version. You can contact our support team for the latest version if it is not available at Epomaker Download Page.
   2. Make sure to run the driver as administrator and you are logged in.
   3. Sketchpad Mode > Upload file > Input the name of your city in English or Chinese (please kindly use the same language as the language setting of the software)
   4. Click Send
6. How to customize the gif/photo on the mini TV.
   1. Sketchpad Menu > Select Picture, select a gif, and upload it;
   2. Then, go to Sketchpad Menu > Upload file, click once on preview to check if the gif looks proper. After that, click on "upload gif". Wait until the progress bar gets 100%, and the upload should be successful.
   3. Please do not use the RT100 or the computer while gif is uploading and wait until the progress bar gets 100%.
   4. For a detailed demonstration, click here to watch the video on our YouTube channel starting at 0:38.
7. Firmware
   1. If keyboard is in wired mode and screen is plugged, the latest firmware version of your RT100 should be V504_OLEDV505