Making The Hdmi Control Connections - Pioneer Elite PRO-110FD Operating Instructions Manual

Using the HDMI Control
On-screen control panel
For an AV system
1 Switches the surround mode in order
HDMI Control
5
Switches the input source in reverse order
2
   
Switches the surround mode in reverse order
3
1 6
SURROUND+
4 Closes the screen to return to the HDMI Control
2 7
menu
INPUT- INPUT+
5 Displays the model number of the connected
3
device
SURROUND-
Void
6
4
HDMI CONTROL HDMI CONTROL Exit
7 Switches the input source in order
Press  or  on the remote control unit of the plasma display to
switch the surround mode in order or in reverse order,  or 
to switch the input source in order or in reverse order. Pressing
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
Note
• You cannot operate the recorder/player when you press  or
 to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
1 Skips commercials
HDMI Control
5
2 Fast reverse
   
3 Stops playback
1 6
Closes the screen to return to the HDMI Control
4
2 7
menu
5 Displays the model number of the connected
3
device
6 Starts playback
4
HDMI CONTROL HDMI CONTROL Exit
Fast forward
7
Press  or  on the remote control unit of the plasma display
to select fast reverse or fast forward mode,  to skip
commercials or  to stop playback. Pressing ENTER starts
playback and HDMI CONTROL turns the control panel screen off
to return to the HDMI Control menu.
For a player
Displays the DVD disc menu or Blu-ray disc's pop-
1
HDMI Control
5
up menu on the player
   
2 Fast reverse
1 6
3 Stops playback
MENU
2 7
Closes the screen to return to the HDMI Control
4
menu
3
Displays the model number of the connected
5
device
4
HDMI CONTROL HDMI CONTROL Exit
6 Starts playback
7 Fast forward
Press  or  on the remote control unit of the plasma display
to select fast reverse or fast forward mode,  to display the DVD
disc menu or Blu-ray disc's pop-up menu on the player or  to
stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the
HDMI Control menu.

Making the HDMI Control connections

When you make changes in connections between the plasma
display and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1 Turn on the plasma display and all the connected devices.
2 Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected devices.
Also confirm the HDMI Control related settings in the connected
devices.
3 Switch to the HDMI input terminals to which the devices are
connected to check if audio and video images are properly output
and displayed.
4 Try turning off the plasma display, then turn the power back
on to the plasma display.
Connecting an AV amp/BD player
4 5
4 5
Rear view
4 5
Optical digital
cable (commercially
available)
AV cable
(commercially
available)
AV amp
BD player
13
HDMI compliant
cable (HDMI cable
having the HDMI
mark)
95
En