Download  Print this page

Using Hdmi Input - Pioneer Elite PRO-110FD Operating Instructions Manual

Plasma display system.
Hide thumbs


Enjoying through External Equipment

Using HDMI Input

The INPUT 4, INPUT 5, INPUT 6, INPUT 7 terminals are HDMI
terminals to which digital video and audio signals can be input.
To use the HDMI terminal, specify the types of video and audio
signals to be received from the connected equipment. For the
types of these signals, see the operation manual that came with
the connected equipment.
Before starting the menu, press INPUT 4, INPUT 5, INPUT 6 or
INPUT 7 on the remote control unit or press INPUT on the plasma
display to select "INPUT 4", "INPUT 5", "INPUT 6" or "INPUT 7".
Video signals supported
720 (1440) x 480i@59.94 Hz/60 Hz
720 x 480p@59.94 Hz/60 Hz
1280 x 720p@59.94 Hz/60 Hz
1920 x 1080i@59.94 Hz/60 Hz
1920 x 1080p@24 Hz
1920 x 1080p@60 Hz
PC signals supported
640 x 480 (VGA) 60 Hz
800 x 600 (SVGA) 60 Hz
1024 x 768 (XGA) 60 Hz
1360 x 768 (Wide - XGA) 60 Hz
1280 x 1024 (SXGA) 60 Hz
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
HDMI Control supported
The plasma display supports the HDMI Control functions. By
connecting devices that support the HDMI Control functions to
the plasma display, you can control the connected device(s) from
the plasma display or remote control unit of the plasma display.
See Using the HDMI Control on Chapter 13.
Deep Color supported
Deep Color means the color depth that describes the number of
bits used to represent the color of a single pixel in a bitmapped
image. Besides the conventional RGB/YCbCr16 bit/20 bit/24 bit
signals, the plasma display also supports RGB/YCbCr30 bit/36 bit
signals. This enables finer, minute color reproduction when a
device that supports Deep Color signals is connected to the
plasma display. When Deep Color signals are received, the color
depth appears on the channel display.
• It may take a short while until the image is displayed,
depending on the equipment connected.
• Make sure to use an HDMI compliant cable.
• When inputting 1080p signals, we recommend you use an
HDMI cable that supports HDMI Category 2.
• When connecting a PC to the HDMI terminal, use the HDMI
compliant PC or video card.
• When connecting a PC to the HDMI terminal using a DVI
output terminal, the plasma display may not display properly. If
that is the case, consult with your PC manufacturer.
• PC picture and/or sound may not be displayed or heard
properly depending on the PC used.
• This plasma display is HDMI compatible. However, depending
on the type of the connected source component, it may exhibit
irregularities with this plasma display. Please consult the
component manual or contact the component manufacturer
for support.
Connecting HDMI equipment
When using the INPUT 4 terminal:
Rear view
Audio cable
(commercially available)
Make this connection
when inputting analog
audio signals.
HDMI equipment
When using the INPUT 7 terminal:
Rear view
HDMI equipment
Viewed from below of
the plasma display
HDMI compliant
cable (HDMI cable
having the HDMI
HDMI compliant
cable (HDMI cable
having the HDMI


Table of Contents

   Also See for Pioneer Elite PRO-110FD

   Related Manuals for Pioneer Elite PRO-110FD

This manual is also suitable for:

Elite pro-150fd

Comments to this Manuals

Symbols: 0
Latest comments: