Making The Hdmi Control Connections - Pioneer PDP-5010FD Operating Instructions Manual

Using the HDMI Control
13
On-screen control panel
For an AV system
HDMI Control
5
   
1 6
SURROUND+
2 7
INPUT- INPUT+
3
SURROUND-
4
HDMI CONTROL HDMI CONTROL Exit
Press or on the remote control unit of the plasma display to
switch the surround mode in order or in reverse order,
switch the input source in order or in reverse order. Pressing
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
Note
• You cannot operate the recorder/player when you press
to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
HDMI Control
5
   
1 6
2 7
3
4
HDMI CONTROL HDMI CONTROL Exit
Press or on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
to stop playback. Pressing ENTER starts playback and
or
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
For a player
HDMI Control
5
   
1 6
MENU
2 7
3
4
HDMI CONTROL HDMI CONTROL Exit
Press or on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
disc menu or Blu-ray disc's pop-up menu on the player or
stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the
HDMI Control menu.
80
En
1 Switches the surround mode in order
2 Switches the input source in reverse order
Switches the surround mode in reverse order
3
Closes the screen to return to the HDMI Control
4
menu
5 Displays the model number of the connected
device
Void
6
Switches the input source in order
7
Skips commercials
1
Fast reverse
2
3 Stops playback
4 Closes the screen to return to the HDMI Control
menu
Displays the model number of the connected
5
device
6 Starts playback
7 Fast forward
to skip commercials
1 Displays the DVD disc menu or Blu-ray disc's pop-
up menu on the player
Fast reverse
2
Stops playback
3
Closes the screen to return to the HDMI Control
4
menu
5 Displays the model number of the connected
device
Starts playback
6
Fast forward
7
to display the DVD

Making the HDMI Control connections

When you make changes in connections between the plasma
display and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1 Turn on the plasma display and all the connected devices.
2 Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected
devices. Also confirm the HDMI Control related settings in
the connected devices.
3 Switch to the HDMI input terminals to which the devices are
connected to check if audio and video images are properly
or to
output and displayed.
4 Try turning off the plasma display, then turn the power back
on to the plasma display.
Connecting an AV amp/BD player
or
Rear view
4
AV cable
(commercially
available)
AV amp
to
4 5
5
Optical digital cable
(commercially available)
HDMI compliant
cable (HDMI cable
having the HDMI
mark)
BD player