Table of Contents
Advertisement
SPEAKER CONNECTIONS
1. Attach the speakers by hocking them onto the screws at
both sides of the TV.
Right speaker
Left speaker
Rear side of TV
® Arrange excessive speaker cord
around the cord holders on the rear
of the speaker units.
2. Connect the speaker wires to the left and right speaker termi-
nals.
Red tine
Remove your finger from the lever,
@ Connect the wire with the
and gently pull on the wire to confirm
red line to @ . Insert the
that it is securely connected
wire while pressing down
the lever.
<Precautions regarding connections >
NOTES:
® Be sure that no speaker wire protrudes and contacts other
© Use speakers with impedance in the range of 8-16 ohms.
®
if speakers that are not magnetically shielded are placed close to the
than its own terminal.
sides of the unit, the magnetic influence may disturb the color of the
® Be sure to correctly connect the RIGHT and LEFT speakers,
display. In this event, move the speakers at least 50 cm (20 in.) away
and the + and —
polarities. If the polarities of one of the
from the sides of the Hi-Fi Monitor Receiver unit.
speakers are connected improperly, the right and left speakers
will operate in reverse phase, and the sense of stereo sound
will be lost.
AFT SWITCH
1. Set the FUNCTION selector to TV.
2. Setthe AFT switch to OFF.
4, Set the AFT switch to ON again.
9
<ARB1184 >
Advertisement
Table of Contents
