Making The Hdmi Control Connections - Pioneer PDP-5080HD Operating Instructions Manual

Using the HDMI Control
On-screen control panel
For an AV system
1 Switches the surround mode in order
HDMI Control
5
2 Switches the input source in reverse order
   
Switches the surround mode in reverse order
3
1 6
SURROUND+
Closes the screen to return to the HDMI Control
4
2 7
menu
INPUT- INPUT+
5 Displays the model number of the connected
3
device
SURROUND-
6 Void
4
HDMI CONTROL HDMI CONTROL Exit
Switches the input source in order
7
Press or on the remote control unit of the plasma display to
switch the surround mode in order or in reverse order,
switch the input source in order or in reverse order. Pressing
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
Note
• You cannot operate the recorder/player when you press
to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
Skips commercials
1
HDMI Control
5
2 Fast reverse
   
3 Stops playback
1 6
4 Closes the screen to return to the HDMI Control
2 7
menu
Displays the model number of the connected
5
3
device
6 Starts playback
4
HDMI CONTROL HDMI CONTROL Exit
7 Fast forward
Press or on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
or to stop playback. Pressing ENTER starts playback and
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
For a player
1 Displays the DVD disc menu or Blu-ray disc's pop-
HDMI Control
5
up menu on the player
   
2 Fast reverse
1 6
3 Stops playback
MENU
2 7
4 Closes the screen to return to the HDMI Control
menu
3
Displays the model number of the connected
5
device
4
HDMI CONTROL HDMI CONTROL Exit
6 Starts playback
7 Fast forward
Press or on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
disc menu or Blu-ray disc's pop-up menu on the player or
stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the
HDMI Control menu.

Making the HDMI Control connections

When you make changes in connections between the plasma
display and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1
2
3
or to
4
Connecting an AV amp/BD player
or
to skip commercials
AV cable
(commercially
available)
to display the DVD
to
Turn on the plasma display and all the connected devices.
Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected
devices. Also confirm the HDMI Control related settings in
the connected devices.
Switch to the HDMI input terminals to which the devices are
connected to check if audio and video images are properly
output and displayed.
Try turning off the plasma display, then turn the power back
on to the plasma display.
4 5
Rear view
4 5
Optical digital
cable
(Commercially
available)
AV amp
BD player
13
HDMI compliant
cable (HDMI
cable having the
HDMI mark)
75
En