Room Light Sensor; Blue Led Dimmer; Orbiter; Video Pattern - Pioneer Elite PRO-110FD Operating Instructions Manual

Adjustments and Settings
11

Room Light Sensor

This function automatically adjusts the brightness of the display
panel in accordance with the brightness level of the viewing area.
For details, use the following procedure.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Room Light Sensor" ( /
4
Select "On" or "Off" ( /
Item Description
On Activates the Room Light Sensor function
Off Deactivates the Room Light Sensor function
5
Press HOME MENU to exit the menu.
Note
• This function is disabled when "OPTIMUM" is selected on the
"AV Selection" menu.
• This function is not available when PC signals are received.
• As this function automatically optimizes image quality, the
process in which image settings such as brightness and tint
gradually change may be seen on the screen. This is not a
malfunction.

Blue LED Dimmer

You can adjust the brightness of the POWER ON indicator
depending on the brightness level of the viewing area. When
"Auto" is selected, the brightness of the indicator changes to
"High", "Mid" or "Low" to match the brightness level of the
viewing area.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Blue LED Dimmer" ( /
4
Select "Auto", "High", "Mid" or "Low" ( /
ENTER).
5
Press HOME MENU to exit the menu.

Orbiter

This function automatically shifts the image little by little to
reduce the occurrence of the burning.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Orbiter" ( /
4
Select "Mode 1" or "Mode 2" ( /
Item Description
Off Disables the Orbiter
Mode 1 Enables the display protection function for any screen
(default)
mode other than "Dot by Dot"
Mode 2
Enables the display protection function for all available
screen modes
70
En
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then
then ENTER).
then ENTER).
then ENTER).
5
Press HOME MENU to exit the menu.
• To cancel this function, select "Off" in step 4.
Note
• For the Dot by Dot mode, see Selecting a screen size manually
on page 68.
• This function does not operate when PC signals are received.

Video Pattern

You can display the Video Pattern screen that also helps
eliminate after-image when it occurs.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "Video Pattern" ( /
A confirmation screen appears.
4
Select "Start" (ENTER).
The Video Pattern screen displays.
Note
• The system is automatically placed into standby one hour after
the Video Pattern screen has started.
• While the Video Pattern screen is on, no buttons operate
except TVa on the remote control unit, STANDBY/ON and a
on the plasma display.
• To cancel the Video Pattern screen, press TVa on the remote
control unit, STANDBY/ON or a (or slide a up) on the plasma
display.
• The Video Pattern timer has priority over the sleep timer. When
the Video Pattern timer is on, the sleep timer becomes ineffective.

Language setting

You can select a language to be used for on-screen display such
as menus from among three languages: English, French, and
Spanish.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "Language" ( /
4
Select a language ( / ).
Language
Menu
5
Press HOME MENU to exit the menu.
then ENTER).
then ENTER).
English