Adjusting Sound Volume; Muting The Sound; Confirming Current Status; Changing Screen Size - Pioneer Elite PRO-1010HD Operating Instructions Manual

Operation

Adjusting Sound Volume

VOLUME
[+/–]
Display operating panel Remote control unit
Press the VOLUME buttons.
Press the [–] or [+] button to respectively decrease and
increase the volume of sound from the speakers.
: 11
VOLUME

Muting the Sound

AXD1496
Press the MUTING button on the remote control
unit.
Press the MUTING button again to restore the sound.
Pressing VOLUME + also quits muting.
30
EN

Confirming Current Status

VOLUME
[+/–]
AXD1496
Press the DISPLAY button.
The currently selected input, AV selection, screen size
and refresh rates will be displayed for about 3 seconds.
Note
The displayed refresh rates may be slightly different from actual
values.

Changing Screen Size

MUTING
This unit incorporates screen modes of various height and
width ratios. For optimal viewing, we recommend that
you select the screen mode that best matches the video
source that you are viewing. Although these modes are
designed for full display of a picture on a wide screen, it is
our hope that you make use of them with a full
understanding of the manufacturer's intentions.
Screen size selection
The size and range of the picture on the screen can be
switched between 5 screen sizes during video signal
input, and 3 sizes during PC signal input.
DISPLAY
Display operating panel Remote control unit
:
f H
:
f V
1 0 2 4
D - S U B
DISPLAY
INPUT1
STANDARD
4 8 . 4 k H z
6 0 . 0 H z
7 6 8
X
D O T B Y D O T