Connection To Input1 (Hdmi) - Pioneer Elite PRO-1010HD Operating Instructions Manual

Pioneer pro-1010hd: operating instruction
Hide thumbs Also See for Elite PRO-1010HD:
Table of Contents

Advertisement

Available languages

Available languages

Connection of composite SYNC analog RGB
source
Make composite SYNC connections for a personal
computer with output that has the vertical
synchronization signal layered on top of the horizontal
synchronization signal.
When connecting to ANALOG RGB IN (INPUT1)
ANALOG RGB IN
AUDIO
INPUT1
INPUT1
D-Sub
R
L
When using D-sub INPUT for INPUT1, select [D-sub] in
[INPUT1 SELECT] in the menu (page 23).
Note
You cannot simultaneously use the HDMI INPUT and this INPUT.
On-screen setup is necessary after connection.
Please see pages 23 to 25.
When connecting to ANALOG RGB (INPUT5)
ANALOG RGB
G(ON SYNC)
B
R
VD
HD (H/V SYNC)
On-screen setup is necessary after connection.
Please see pages 23 to 25.
Notes
÷ When making composite SYNC connections, do not connect
anything to the VD jack. If connected to, the picture may not
be displayed properly.
HDMI
INPUT5
Installation and Connections
÷ Some types of computer devices manufactured by Apple
Computer, Inc. are equipped with both G ON SYNC and
composite SYNC outputs. This type of component should be
connected using the G ON SYNC connection (page 14).

Connection to INPUT1 (HDMI)

Connect an AV component with a digital video output
(digital set top box, DVD player, etc.) compatible with
HDCP (High-bandwidth Digital Content Protection).
Before attempting to connect one of these components,
read its operating instructions to make sure that it can be
connected.
ANALOG RGB IN
AUDIO
INPUT1
INPUT1
D-Sub
R
L
When using the HDMI INPUT for INPUT1, select [HDMI]
in [INPUT1 SELECT] in the menu (page 23).
Note
You cannot simultaneously use D-sub INPUT and this INPUT.
After connection is made, on-screen setup is necessary
to match the connected component. Please see page 25
to 27.
Notes
÷ Use a HDMI (High Definition Multimedia Interface) cable for
connection.
÷ When connecting a component with DVI connector, use an
DVI / HDMI conversion cable to make a connection.
÷ It is not a jack intended to be used with a personal computer.
÷ See appendix 1 (page 52) for information regarding signal and
display formats supported by INPUT1.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
HDMI
AV component with a
digital video output
15
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite pro-810hd

Table of Contents