Switching Inputs; Adjusting Head Phone Volume - Pioneer TVM-PW910T Instruction Manual

Switching inputs

Connect the terrestrial digital tuner or DVD player, and two systems of input pictures (VIDEO/ HDMI)
can be switched to and from and displayed.
The switching of inputs works in the following manner:
Press SRC/PWR button
Press the button to switch between [Video], [HDMI].
※ Upon switching, the current input will be shown on the upper left of the screen (for about three seconds)
• If the device is not connected or there is no picture signal from the input,
the current input will not be displayed on the upper left.
• Can be changed to suit the device connected such as [DVD1],
[terrestrial digital] and other names to be displayed on the screen.
(☞Page 20)
Adjusting the head phone volume
The user can listen to music by connecting the head phone to the head phone terminal （☞ Page 9）on the side of
the body.
Press VOL ー／＋button
The volume can be adjusted from 0 (min) to 30 (max).
※「0」means mute.
Reference
Precaution
The head phone terminal will produce the music of
the HDMI input terminal. It will not work unless
it is connected to the HDMI.
VOL ー
To lower the volume
VOL ＋
To increase the volume
11