Automatic Power-Off (Power Management) - Pioneer Elite PRO-1010HD Operating Instructions Manual

Other Operations
1
Press the MENU button to display the menu
screen.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
ENTER
SET
2 Use the 2/3 buttons to select [OPTION].
STANDARD
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ORBITER
MASK CONTROL
INPUT1 SELECT
SR + MODE
ENTER
SET
3 Use the 5/∞ buttons to select [ENERGY SAVE]
then press the SET button.
STANDARD
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ORBITER
MASK CONTROL
INPUT1 SELECT
SR + MODE
ENTER
SET
4 Press the 2/3 buttons to select [ENERGY SAVE]
setting.
ENERGY SAVE
SET
SET
44
EN
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
EXIT
MENU
INPUT1
SETUP OPTION
:
ENGLISH
:
STANDARD
:
OFF
:
DISABLE
:
OFF
:
ON
:
D-SUB
:
OFF
EXIT
MENU
INPUT1
SETUP OPTION
:
ENGLISH
: STANDARD
: OFF
:
DISABLE
: OFF
:
ON
:
D-SUB
:
OFF
EXIT
MENU
:
STANDARD
EXIT
MENU
The factory default setting is [STANDARD].
Each time the 2/3 buttons is pressed, the setting
changes as follows:
3 STANDARD 2
3 MODE3 2 3 MODE2 2
÷ STANDARD ... Brightness is controlled in
accordance with input signal to
produce bright, easily viewed image.
÷ MODE1 ......... Brightness is controlled in
accordance with input signal, but
power consumption is less than that
used in [STANDARD] mode.
÷ MODE2 ......... Brightness is controlled in accordance
with input signal, but power
consumption is less than that used in
[MODE1].
÷ MODE3 ......... Brightness is set at fixed level,
regardless of input signal level.
Effective at reducing screen aging
due to burned lag images, etc.
5
Press the SET button.
[ENERGY SAVE] is set, and you return to the display
shown in step 3.
6
After completing settings, press the MENU button
to return to the normal display.
Note
The [ENERGY SAVE] setting affects all input sources.
Automatic Power-off
(POWER MANAGEMENT)
The unit is equipped with [POWER MANAGEMENT] and
[AUTO POWER OFF] functions; when set, the function
automatically switches the unit to either standby mode or
power off mode whenever a sync signal is not detected
(a warning message is displayed on the screen before the
functions operate).
Notes
÷ Power Management function setting is only effective D-SUB is
selected with [INPUT1 SELECT], and there is PC signal input
via INPUT1.
÷ Setting the Auto Power Off function is only effective in cases
other than the above.
÷ Always turn off the unit's main power switch when not using
the display for extended periods of time.
3 MODE1 2