ANCEL BD500 - Bluetooth Scan Tool Manual

DOWNLOAD APP

1. Scan the QR code below to download the software for Android and iOS.
   ANCEL Official Website
   
   for Android
   
   for iOS
   
   

OBD INTERFACE POSITIONS

For different vehicles, the position of the DLC may be different, please refer to the following possible positions:

OPERATION DIAGRAM

BLUETOOTH CONNECTION

Turn on Bluetooth -Start the app - Automatic device connection—Connected. Image 1 is not connected, image 2 is connected.

START USING YOUR DEVICE

After the Bluetooth connection, the diagnostic software will be launched if your vehicle supports it. You can use all the functions of the device, such as the standard OBDII function, Volkswagen/Audi Diagnostics and other functions.

FEEDBACK

You can send us feedback if you encounter any problems while using it. To do so, fill out and submit the feedback form.

SOFTWARE UPGRADE AND FIRMWARE UPGRADE

1. BD500-APP Software Upgrade:
   Delete the program APP directly, and then download the latest software again.(View the latest software version: Open app---Settings---About us).

2. BD500- APP Firmware update:
   1. Open the app---Settings---Device settings---Firmware upgrade---Currently the latest version ***(no update required).
   2. Open the app---Settings---Device settings---Firmware upgrade---Current version and ask for the latest version----Click the menu button 'Upgrade'--Firmware upgrade successful (update required).

Documents / Resources

References

• ANCEL Official Site: Anceltech.com
• ‎ANCEL on the App Store

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ANCEL BD500 - Bluetooth Scan Tool Manual