Advertisement
Please note that the instructions in this manual will refer to the soundbar button number e.g (Ref.*number*) in accordance with the diagrams.
Using the USB to Mini USB power cord provided, plug the mini USB connector into the back of the unit (Ref.8) and plug the other end into a USB power supply (mains adaptor or other USB power supply).
When the unit is not fully charged, the indicator light (Ref.3) will display as red. When the unit has reached full power, the red light will disappear.
Switch the unit on by rotating the On/Off/Volume dial clockwise until the dial clicks into place and the soundbar is powered on (Ref.6). To switch the unit off, rotate the dial (Ref.6) anti-clockwise until the dial will not rotate any further.
Use the On/Off/Volume dial (Ref.6) to switch the unit on or off and change the volume.
In Bluetooth, SD, or USB mode, use the ⏯ button to play or pause a track, and use the (Ref.2)/(Ref.4) buttons to skip tracks or fast forward/rewind (press and hold to rewind or fast forward).
Press the 'MODE' button (Ref.5) to change modes between SD card, Bluetooth, AUX and USB mode.
Please note that the following controls and functions relate to Bluetooth, SD card and USB mode only. For AUX controls and functions, please see the section titled 'AUX Mode'.
Note: in the table below, (H) = 'Press and hold'.
Soundbar button | Function | Reference |
![]() | Previous/next track | (Ref.2)/(Ref.4) |
(H) ![]() | Rewind/Fast forward | (Ref.2)/(Ref.4) |
![]() | Play/Pause | (Ref.1) |
MODE | Change mode | (Ref.5) |
On/Off/Volume Dial | Power On/Off/Volume+/- | (Ref.6) |
To connect an external device to the Atlas soundbar, ensure that the soundbar is in 'Bluetooth' mode. Select 'Bluetooth' mode manually by using the 'MODE' button (Ref.5).
The soundbar will sound with the phrase 'Bluetooth' to indicate that Bluetooth mode is now active.
The soundbar indicator light (Ref.3) will flash until successfully connected to a Bluetooth device.
Switch Bluetooth on for your external device. Select 'Majority Atlas' from the list of devices.
When connected, the indicator light (Ref.3) will remain static blue.
When your external device is connected, the soundbar will sound with the phrase 'Bluetooth Connected' to indicate successful connection. You can now play audio through the speakers. When disconnected, the soundbar will sound with the phrase 'Bluetooth Disconnected'.
If the unit is switched to a different mode while Bluetooth is connected, Bluetooth will automatically be disconnected.
Please see the "BACK VIEW" section.
When a USB or SD card is inserted, the unit will automatically switch to the correct mode and begin playing audio. If necessary, select 'USB' or 'SD' mode using the 'MODE' button (Ref.5).
Insert a USB drive into the USB port at the back of the unit (Ref.9). When USB mode is selected, the soundbar will sound with the phrase 'USB'. Maximum compatible storage: 64GB.
Insert a micro SD card into the 'SD' port at the back of the unit (Ref.7). When SD card mode is selected, the soundbar will sound with the phrase 'Memory Card'. Maximum compatible storage: 64GB.
Please see the "BACK VIEW" section.
Use the included 3.5mm to 3.5mm AUX cable to connect an external device to the 'AUX' input of the Majority Atlas (Ref.10).
When an AUX cable is plugged in to the AUX port at the rear of the speaker (Ref.10), the unit will automatically switch to AUX mode (indicated with the phrase 'Line in'). If necessary, select 'AUX' mode using the 'Mode' button (Ref.5).
Soundbar button | Function | Reference |
![]() | Play/Pause | (Ref.1) |
MODE | Change mode | (Ref.5) |
On/Off/Volume Dial | Power On/Off/Volume+/- | (Ref.6) |
Observation | Potential Cause/Solution |
No power/function | Check whether the power is switched on or off at the wall. Check that the power adaptor is properly connected to the power outlet. |
No sound | Check whether MODE is correctly selected. If you are connected via Bluetooth or AUX, turn up the volume on your device. |
Function disturbance | Switch off and unplug the unit. Leave it for 2 minutes and switch it on again. |
Bluetooth not connecting | Ensure that the soundbar is in Bluetooth mode and the Bluetooth on your device is switched on. Select the Bluetooth device 'Majority Atlas' and you should now be able to play audio. |
If you require further assistance with your new soundbar, please contact our support team on the Majority website: www.majority.co.uk/support
Power Supply | DC 5V |
Mode: | Bluetooth 3.5mm AUX-in USB reader SD card reader |
Power consumption | 20W (working) |
Dimensions | 45 x 6 x 5 cm |
Weight | 0.80 kg |
Speakers | 2*2" full range + 2 diaphragm |
Bluetooth Version | 5.0 |
Bluetooth range | up to 10 meters |
Compatible file types | MP3, WMA, FLAC, MAV, APE |
Maximum compatible USB/SD storage | 64GB |
FCC ID | 2AHRPBR-30 |
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Please read all instructions carefully before use and keep for future reference.
Risk of electric shock. Do not open
Read all instructions carefully before use and keep for future reference
When servicing, use only identical replacement parts
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please read all instructions carefully before use and keep for future reference
Register your product online for a FREE 3 year WARRANTY extended warranty at: www.majority.co.uk
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Atlas and is the answer not in the manual?
Questions and answers