Strömungswächter | FS10-dbEX
3 Technische Daten
Überwachungsbereich Strömung:
flüssige Medien
gasförmige Medien
Druckfestigkeit Messkopf:
Ansprechzeit:
Wasser
Öl
Luft
* Verzögerungswerte gemessen bei Schalt-
punkt einstellung auf 1,8 (Wasser, Öl) /18
(Luft) m/s und einer Be triebs strömung von 2
(Wasser, Öl) /20 (Luft) m/s nach plötzlichem
Strömungsstillstand.
Schutzart:
Nennspannung:
Meldeausgang:
maximale Belastung
induktive Last max.
- Kennzeichnung gemäß EU-Richtlinien
6
TECHNISCHE DATEN | TECHNICAL DATA
3 Technical Data
Flow rate range:
min. 10 mm/s
max. 4,5 m/s
min. 0,5 m/s
max. 50 m/s
Pressure resistance of the monitoring head:
100 bar
Response delay:
ca. 1 s *
ca. 1,5 s *
ca. 2 s *
Degree of protection:
IP 67
Input voltage:
DC 24 V (± 20%)
Signal output:
500 mA
100 mA
liquids
10 mm/s (0.39 inch/s) minimum
4.5 m/s (14.76 ft./s) maximum
gases
0.5 m/s (20 inch/s) minimum
50 m/s (164 ft./s) maximum
water
oil
air
* Delay with the switch point set to 1,8
(water, oil) /18 (air) m/s and the flow rate
at 2 (water, oil) /20 (air) m/s, after a sudden
complete flow stoppage.
max load
inductive load max
- marking in accordance with EU directives
100 bar/1450 psi
approx. 1 s *
approx. 1,5 s *
approx. 2 s *
IP 67
DC 24 V (± 20%)
500 mA
100 mA
Need help?
Do you have a question about the FS10-dbEX and is the answer not in the manual?
Questions and answers