Table of Contents
Advertisement
Quick Links
Operating instructions
Power DALI-2 rotary controller TW
Art. no. 1746DSTE
DALI-2 rotary controller TW
Art. no. 1745DSTE
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Product image non-binding
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
kundencenter@jung.de
23.09.2024
82408403 J0082408403
www.jung.de
Advertisement
Table of Contents
Related Manuals for Jung 1746DSTE
Summary of Contents for Jung 1746DSTE
- Page 1 Operating instructions Power DALI-2 rotary controller TW Art. no. 1746DSTE DALI-2 rotary controller TW Art. no. 1745DSTE ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Product image non-binding Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de 23.09.2024...
-
Page 2: Table Of Contents
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Table of contents Safety instructions ...................... 3 Device components ...................... 3 Intended use ........................ 3 Product characteristics ..................... 4 Functional description....................... 4 Operation .......................... 5 Information for electrically skilled persons ................ 7 Mounting and electrical connection................ -
Page 3: Safety Instructions
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Safety instructions Electrical devices may be mounted and connected only by electrically skilled persons. Serious injuries, fire or property damage are possible. Please read and follow the manual fully. Danger of electric shock. Always disconnect before carrying out work on the device or load. -
Page 4: Product Characteristics
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Product characteristics Product characteristics without programming – Certified DALI-2 control device to IEC62386-101, 103, 301, 302 – Power DALI-2 rotary controller TW: DALI-2 application controller with integ- rated bus power supply for up to 26 DALI subscribers –... -
Page 5: Operation
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW brightness. If there are multiple control points, saved settings are automatically adopted by the other control points. Input device (programming necessary): The device no longer sends control commands to DALI operating devices, but rather only telegrams to a higher-level DALI-2 controller. - Page 6 Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Adjusting the brightness ￭ Turn the control knob. Turn slowly = Brightness change small Turn quickly = Brightness change great Setting the colour temperature Figure 2 ￭ Turn pressed control knob. Turn left (W) = warmer light (reduce colour temperature) Turn right (C) = colder light (increase colour temperature) Saving the switch-on brightness If the lighting is not always to be switched on with the same brightness, then this can...
-
Page 7: Information For Electrically Skilled Persons
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Information for electrically skilled persons DANGER! Electric shock when live parts are touched. Electric shocks can be fatal. Always disconnect before carrying out work on the device or load. To do so, switch off all corresponding circuit breakers, secure them against being switched on again and check that there is no voltage. -
Page 8: Commissioning Without Programming
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Figure 4: Connection diagram, operation as input device Power DALI-2 rotary controller TW (1746DSTE) DALI subscriber e.g. DALI-EVG, DALI Device Type 8 for Tunable White DALI-2 rotary controller TW (1745DSTE) Central control, e.g. KNX DALI-2 Gateway Multimaster Control cable: appropriate type, cross-section and routing for the specifications for 230 V cables. - Page 9 Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Saving a basic brightness The basic brightness should be set to a state that does not directly lead to an in- crease in brightness when turning the DALI rotary control device at minimum bright- ness.
-
Page 10: Commissioning Via Dali Programming Device Or Central Control
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Commissioning via DALI programming device or central control For operation of the device exclusively for control of a DALI group or for integration as Input device in a higher-level controller, programming with an external device is required (e.g. -
Page 11: Technical Data
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Technical data Power DALI-2 rotary controller TW Rated voltage AC 230 V ~ Mains frequency 50 / 60 Hz Power consumption Max. 2 W Ambient temperature -5 ... +45 °C Rated voltage DALI DC 16 V (typ.) Permitted bus power Max. -
Page 12: Programming
Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Programming Programming the operating mode In operating mode, you can set whether the device sends broadcast telegrams or transmits telegrams exclusively to an operating device group. Both operating modes can work with or without cyclical transmission. When cyclical transmission is active, the telegrams are repeated at 5-second intervals. - Page 13 Power DALI-2 rotary controller TW, DALI-2 rotary controller TW If the central control is another DALI rotary control device which controls an operating device group as an application controller, instances 0 and 2 must be activated and in- stances 1 and 3 deactivated (see Table : Programming Page 14)).
- Page 14 Power DALI-2 rotary controller TW, DALI-2 rotary controller TW Event name Telegram (binary) Slowly rotate anti-clockwise 00 0000 0101 Rotate anti-clockwise in increments 00 0000 0110 Instance 3 = Instance type 2 (analogue input => turning with absolute values) This is a DALI-2 standard instance type. Absolute position values are sent with the rotary motion.
-
Page 15: Troubleshooting
As a result, the group membership of the operating devices was deleted. The groups must be programmed again. Warranty The warranty is provided by the specialist trade in accordance with statutory require- ments. ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle 82408403 15 / 16 23.09.2024... - Page 16 Power DALI-2 rotary controller TW, DALI-2 rotary controller TW GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de www.jung.de 82408403 16 / 16 23.09.2024 J0082408403...
Need help?
Do you have a question about the 1746DSTE and is the answer not in the manual?
Questions and answers