Troubleshooting; Error Messages - Olympus IR-300 Advanced Manual

Troubleshooting

Error messages

Monitor indication
q
There is a problem with
the card.
CARD ERROR
Writing to the card is
q
prohibited.
WRITE-
PROTECT
The internal memory
>
has no available
memory and cannot
MEMORY FULL
store any new data.
The card has no
q
available memory and
cannot store any new
CARD FULL
data.
There are no pictures in
L
the internal memory or
NO PICTURE
on the card.
There is a problem with
r
the selected picture and
PICTURE
it cannot be played back
ERROR
on this camera.
The battery
compartment/card
cover is open.
CARD-COVER
OPEN
When the camera is
used for the first time or
the battery has been
removed for a long time,
the date and time are on
Y/M/D
the factory default
setting.
This card cannot be
CARD SETUP
used with this camera
POWER OFF
FORMAT
or the card is not
formatted.
SELECT GO
Possible cause Corrective action
This card cannot be used. Insert a
new card.
The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
Back up all data to a card or erase
unwanted data. Before erasing,
download important data to a
computer.
Replace the card or erase unwanted
data. Before erasing, download
important data to a computer.
The internal memory or the card
contains no pictures.
Record pictures.
Use image processing software to
view the picture on a computer. If
that cannot be done, the image file
is damaged.
Close the battery compartment/card
cover.
Set the date and time.
• Replace or format the card.
• Select [POWER OFF] and press
i. Insert a new card.
• Select [FORMAT] and press i.
All data on the card is erased.
12
145