Adjusting The Image Processing Function (Pixel Mapping) - Olympus IR-300 Advanced Manual

Adjusting the image processing
function (PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one
minute after taking or viewing pictures to allow the pixel mapping function
to perform properly.
Top menu [MODE MENU]
1
When [START] is displayed,
press i.
• The [BUSY] bar is displayed during pixel
mapping. When pixel mapping is
finished, the screen returns to the mode
menu.
Note
• If you turn the camera off during pixel mapping, start again from Step 1.
[SETUP] [PIXEL MAPPING]
g"Using the menus" (P. 18)
PIXEL MAPPING START
s
X
VOLUME
VIDEO OUT
103
8