Adjusting The Monitor Brightness - Olympus IR-300 Advanced Manual

Adjusting the monitor brightness

[FILE NAME] settings
RESET The file number and folder number are reset every time a new card is
inserted in the camera. The folder number returns to No. 100 and the file
number returns to No. 0001. This method is useful when grouping files on
separate cards.
AUTO Even if a new card is inserted, the folder number and file number are
retained from the previous card, so the same file number is not used on
different cards. This helps you to manage multiple cards. This method is
useful when you want to manage all your files with sequential numbers.
Top menu
Note
• When the file number reaches 9999, it returns to 0001, and the folder number
changes.
• When both the folder number and file number reach their respective maximum
number (999/9999), the number of storable pictures becomes 0 even if the card
is not full. No more pictures can be taken. Replace the card with a new one.
Adjusting the monitor brightness
8
This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu
1
Adjust the brightness while
looking at the monitor, and when
you have set the desired level,
press i.
• Press [ to brighten the monitor, and
press \ to darken it.
100
[MODE MENU] [SETUP]
[MODE MENU] [SETUP]
[FILE NAME] [RESET] / [AUTO]
g"Using the menus" (P. 18)
[s]
g"Using the menus" (P. 18)
SELECT
s
GO