Selecting The Video Output; Protecting Pictures - Olympus IR-300 Advanced Manual

Selecting the video output

You can select [NTSC] or [PAL] according to your TV's video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
Top menu [MODE MENU]
TIPS
• TV video signal types & main regions
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea, Japan
PAL Europe, China
• The factory default setting varies depending on the region where you
purchased the camera.

Protecting pictures

You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-
frame erase function, but they are all erased by formatting.
Select the picture you want to protect and display the top menu.
Top menu [MODE MENU]
• To cancel protection, select the protected picture and select [OFF].
[SETUP] [VIDEO OUT]
g"Using the menus" (P. 18)
[0] [ON] / [OFF]
g"Using the menus" (P. 18)
Protecting pictures
[NTSC] / [PAL]
77
5