Table of Contents
Advertisement
Chapter 8
Setting ISDN Primary Rate Annex Values
Assigning Addresses
Annex Manager User Guide
8-12
•
Remote Address
channel. If this column displays
will negotiate for an address.
The information in this box is current as of the time you selected
from the
Channels
The
field assigns an address to the channel you selected.
Remote Address
You can enter an IP address here.
Using Push Buttons
This window uses
Apply
information about push buttons, see Chapter 5.
Assigning Remote Addresses
To assign a remote address to a B-channel:
1.
Select a single ISDN Primary Rate Annex in the main window.
2.
Display the
Channels
3.
Select a single channel from the
4.
Enter an IP address in the
5.
Press
Apply
Annex Manager changes the channel's address. The next call that
uses the channel you selected will use the address you enter here.
lists the current address associated with each
0.0.0.0
field.
Setup
,
, and
Help
Close
window.
Channels
Remote Address
.
Part 2
Setup Mode
, the Annex and the peer
buttons. For detailed
box.
field.
Advertisement
Table of Contents
