Snmp Proprietary Mib Objects; Mp Selectable Parameters For The Remote Annex - Bay Networks Remote Annex Administrator's Manual

Multilink PPP Addendum to the Remote Annex Administrator's Guide for UNIX

SNMP Proprietary MIB Objects

MP Selectable Parameters for the Remote Annex

18 166-024-833 Rev. A
The following table lists new SNMP MIB variables that are supported
in this release. These objects can be found in the file XYLO-
PORTS.MIB:
SNMP MIB Variable
anxpAutoPPPSecurity
anxpAutoTimeout
The following table lists MIB objects. These objects can be found in
the file XYLO-ANX.MIB:
SNMP MIB Variable Access
anxVcliInactivity read-write
The following table lists MP parameters for the Remote Annex. These
objects can be found in the file XYLO-PORTS.MIB:
SNMP MIB Variable
mpMrru
mpEndPointClass
mpEndPointValue
Access Default
read-write Disable 2
read-write 30 seconds
Default
0
Access Default
read- 1500 octets
write
read- unitmacaddr
write (4)
read- N/A
write
Corresponding Annex
Variable
ppp_sec_auto
autodetect-timeout
Corresponding Annex Variable
vcli_inactivity
Corresponding Annex
Parameter
mp_mrru
mp_endpoint_option
mp_endpoint_value