Booting Annexes
Booting and Resetting Annexes
W
hen you use a command that changes parameter values, you can
use the
or
commands to apply new Annex configurations. You
Boot
Reset
can use
to notify Annex users about a boot or reset, or send any
Broadcast
message to all devices connected to the Annexes you select. This chapter
explains these commands in the following sections:
•
Booting Annexes
•
Resetting an Annex Configuration
•
Broadcasting Messages
•
Configuring PRI Internal Modems
For detailed information about Annex configurations, refer to your Annex
hardware guide.
The
command allows you to boot one or more active Annexes. You
Boot
can choose to boot Annexes immediately, set a time in the future for the
boot to take place, and send an explanatory message to all users. This
section gives you directions for using the
•
Displaying the Boot Window
•
Understanding the Boot Window Format
•
Booting an Annex
The
command terminates all active connections to an Annex.
Boot
You cannot return to the main window once you display the
window.
Chapter 16
command. It includes:
Boot
Annex Manager User Guide
Boot
16-1