Upgrading Procedure (Using Sql 2008 Server Express); Upgrading From Sql 2005 Server Express To Sql 2008 Server Express - DIS SW 6000 Installation Manual

Danish Interpretation Systems

Upgrading procedure (using SQL 2008 Server Express)

If you have a previous SW 6000 version already installed using the SQL 2005 Server Express but want to use
the SQL 2008 Server Express, you can upgrade as follows.

Upgrading from SQL 2005 Server Express to SQL 2008 Server Express

1 Backup the Database using 'SW 6000 Backup
Utility'.
2 Double-click the 'setup.exe' in the SW 6000
Installation folder and select 'Install'
Select the 'Advanced Installation'
Select 'Remove All' to remove the database,
accept to delete all SW6000 databases, and
enter 'sa' in the Name field and 'sw6000-1' in the
password field.
Cancel the remaining installation and Finish.
Optionally, it is possible to remove the database
using SQL Server Management Studio Express.
The use of SQL Server Management Studio
Express is not supported by DIS.
3 Remove the old installation using "Control Panel
- Add or Remove Programs" in the following
order:
1. SW6000
2. SQL 2005 Server Express
4 Install the applications as explained in the
section "Software Installation".
5 Restore the Database using 'SW 6000 Backup
Utility'.
6 Start the CAA.
You will be prompted to upgrade the database
when the CAA is started the first time after the
installation. Accept this and the database will
automatically be upgraded.
Click 'Yes'.
.
.
Manual 01 19 60011
Installation Manual
37