Table of Contents
Advertisement
Danish Interpretation Systems
Computer Setup
5
The values in those fields are set during
installation.
The Computer name must be changed if a
database from another installation is restored to
this database.
Important: The name in "queue" field must not be
the same as the name in the "Computer" field.
The "queue" field must have the format :
"Computer_name-SW6000"
Port Setting
6
This window is used for changing the
communication properties of the CU
6005/6010/6011.
Make the changes, click 'Update' and then click
'Next'.
7
By selecting a Com port and Click 'Select' the
CUI application starts with connection to the port
chosen.
Command line parameters for the CUI
-W
-COMx
Show a communication window when the CUI is started. Don't use
this parameter in normal use.
Specifies the COM port to use. COM1 to COM4 are valid entries.
When the COM port is specified, the 'Select COM port' popup is
disabled.
Manual 01 19 60011
Installation Manual
43
Advertisement
Table of Contents
