Conference discussion system, central units, delegate units, chairman units, microphone unit, hand microphones, microphone control, system control software (51 pages)
Danish Interpretation Systems List of Contents List of Contents... 3 Important ... 4 Compliancy... 4 Installation precautions ... 4 Cleaning ... 4 Repacking ... 4 Warranty ... 4 Description of the DCS 6000 system ... 5 Features... 5 System components... 6 Central equipment etc...
Danish Interpretation Systems Important Compliancy The equipment has been tested and found to comply with the limits of the following standards for digital devices: EN55103-1 (Emission) EN55103-2 (Immunity) FCC rules part 15, class A (Emission) This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference...
Danish Interpretation Systems Description of the DCS 6000 system Features The DCS 6000 system has the following main features: Fully digital Excellent sound quality “State of the Art” fully digital integrated interpretation, discussion and voting system offering interpretation, language distribution, conference microphone and voting facilities with attendance check with Chip Card ™.
Danish Interpretation Systems System components The CU 6010 Central Unit supports all available units in the DCS 6000 series: Central equipment etc. EX 6010 Extension Unit PS 6000 Power Supply AO 6008 Audio Output box RP 6004 Repeater for four chains JB 6002 Junction Box with 2 outputs JB 6004...
Danish Interpretation Systems Operating instructions IS 6132 P Interpreter Set General description The IS 6132 Interpreter Set is designed for use for one interpreter, It is a compact unit for table top use. The design of the units is easy understandable with a “listening part”...
Page 8
Danish Interpretation Systems Front plate controls Incoming Section Volume This control adjusts the listening level in the connected headphone Bass This control adjust the Bass level in the connected headphone Treble This control adjust the Treble level in the connected headphone a-b-c-d These button selects between four pre-selection of...
Danish Interpretation Systems Headset Connector On the left side, a DIN connector is located for connecting a DIS headset instead of a microphone. “Display” power connector The unit supports a dimmed backlight (on/off user selectable) in the LCD display with no external power supply connected.
Page 10
Danish Interpretation Systems If the B-select buttons is pressed the last two menu items are shown: -Backlight -AB with mic on A menu is selected by pressing the button to the left of the menu (a-d). Then the display shows the next level of menus or selections.
Danish Interpretation Systems LCD backlight This menu gives the user the possibility to control the dimmed LCD backlight: LCD backlight: ■ON The user can toggle the backlight setting between ON and OFF by pressing the relay-select buttons. Press OK to return to the Set-up menu Only dimmed LCD backlight can be controlled using this menu –...
Page 12
Danish Interpretation Systems If one of the buttons is held down for more than one second the channels will scroll through the languages with a speed of 2-4 languages per second. Only the number of channels set at the Channel Set- up menu at the CU 6010 can be selected and shown.
Page 13
Danish Interpretation Systems Speaking too fast) When pushing this button the LED in the Speaking too fast button lights in 10 sek. in all IS 6132 units. And at the same time the Speaking too fast indication will be indicated in units supporting this function (as some CM6xxx units or PC with SW 6000 software) Call...
Danish Interpretation Systems User Manual System Setup For generel guidelines etc. please consult the CU 6000 User Manual. Typical schematics Manual 01 18 04445...
Danish Interpretation Systems Appendix Language list The following languages are supported by the DCS 6000 system: Language ISO 639-2/B abbreviation Floor language Afrikaans Albanian Arabic Armenian Azerbaijani Basque Belarusian Bengali Bulgarian Burmese Cantonese Catalan Chinese Corsican Croatian Czech Danish Dutch English Estonian Finnish...
Danish Interpretation Systems Technical appendix Cabling CAT5 The DCS 6000 system uses CAT5, CAT5e or CAT6 FTP or STP cables with screened RJ45 connectors. It is important to use only FTP or STP (screened) cables and screened RJ45 connectors and not UTP cable, which is unscreened. EIA 568-B wiring shall be used.