Table of Contents
Advertisement
Danish Interpretation Systems
Advanced settings CUA, CDA
Command line parameters for the CUA and CDA
-CONNECTSTRING "connectstring"
-DISABLEAUTOHIDE
-CUI 'PC-name'
Advanced settings ECA
1
After the ECA has been installed, the ECA
shortcut is placed on the Desktop and in the start
folder.
2
Click the 'ECA Interface' shortcut on the desktop
2
When starting the 'ECA' the following window
appears:
The COM ports, which are configured, will be
highlighted.
Insert the Name of the Computer, where the
database is installed
Insert the 'Default Database name'
Click 'Save'
Use this parameter to specify the database the CUI shall connect
to. An example of a valid 'connectstring' entry is
Provider=SQLOLEDB.1;Initial Catalog=SW6000-1;Data
Source=bkk-chn-
lap\SW6000;uid=SW6K11;password=HmAeC2005;Timeout=30;
Will not hide taskbar
If the CUA and CDA shall automatic change connection to
database if the CUI is starting up on another database this
parameter has to be inserted in the command line.
Manual 01 19 60011
Installation Manual
41
Advertisement
Table of Contents
