Table of Contents
Advertisement
Danish Interpretation Systems
Command line parameters for the ECA
-W
-COMx
Advanced settings CUI
1
After the CUI has been installed, the CUI
shortcut is placed on the Desktop and in the start
folder.
To access advanced settings remove the
command line parameter in the shortcut
selecting the com port.
Click the 'CU Interface' shortcut
2
When starting the 'CUI Interface' the following
window will then appear:
The COM ports, which are available, will be
highlighted.
3
Pressing the 'Tools' menu brings the following
two choices:
Room Selection
Port Setting
4
Creating Database Connections
This window gives the possibility to add more
database connections or change the existing
ones.
Functionality is found in the section 'Creating
Database Connections'
42
Show a communication window when the ECA is started. Don't use
this parameter in normal use.
Specifies the COM port to use. COM1 to COM4 are valid entries.
When the COM port is specified, the 'Select COM port' popup is
disabled.
Manual 01 19 60011
Installation Manual
Advertisement
Table of Contents
