Danish Interpretation Systems
Upgrading from previous versions
Upgrading procedure
If you have a previous SW 6000 version already installed, you can upgrade to version 3.3 as follows:
1
Install the SW6000 Migration Utility from the SW 6000 version 3.3 CD folder "7f.SW6000 Migration
Utility 3.2.55 to 3.3.10" by clicking 'Setup'
2
Start the Utility by clicking the Icon on the desktop
3
The default database is SW6000-1.
Click Upgrade to start the upgrade of the database
4
After Upgrade of the database, close the utility. As the utility shall not be used again, the utilty can be
removed from the PC in the Control Panel – Add/Remove programs.
5
Install the licensed application like CAA, CUI, CUA, CDA and ECA as instructed in the respective
installation sections.
The upgrade to version 3.3 is now completed
Manual 01 19 60011
Installation Manual
15