Connecting To A Pc; System Requirement; Installing The Software - Mpio FY 500 User Manual

Connecting to a PC

System Requirement

 IBM PC
System: USB Interface 2.0, Standard device and a CD-ROM Drive equipped
CPU: Pentium 133MHz or faster
Memory: 64MB or more
Hard disk space: 20MB or more
Supported Operating Systems: Windows 98 / 98SE / ME / 2000 / XP
 Macintosh
System: USB Interface 2.0, Standard device and a CD-ROM Drive equipped
EX) Power Mac G3 (Blue & White) / G4 / G4 Cube, iMac / iBook, PowerBook, PowerBook G4
Memory: 64MB or more
Hard disk space: 20MB or more
Supported Operating Systems: Mac OS version 9.2 or later
Caution
Connection using USB Hubs or extension cables is not guaranteed.
Note
In Windows 98 / 98SE, the program must be installed to use FY500 as a removable disk. Please install
the USB drivers before use.
In Windows ME, 2000, XP, FY500 may be used as a Removable Disk without any separate programs.
FY500 is accessible though the Windows Explorer.
To format, or upgrade the firmware of FY500 in Windows 98, 98SE, ME, 2000 or XP, please install the
MPIO Utility.

Installing the Software

How to install windows 98 device driver, MPIO utility and other utility.
Insert the Installation CD into the CD-ROM Drive.
1
The installation will auto-start and the installation will
begin as shown in right. If the installation doesn't
auto-start, double-click the CD-ROM icon in Windows
Explorer.
2 Click the [Next] button.

Click
