Installing Usb Driver Manually - Mpio FY 700 User Manual

▄ Installing USB Driver Manually

Please refer to the below only if the device is not plugged with
Windows 98/98SE.
Connect the product (FY700) with a computer with the USB
cable. When Add New Hardware Wizard window appears
on the screen, click the [Next] button.
Check "Search for the driver for your device", click the
[Next] button.
14
Click
Click
Insert the CD included in the package into the CD-ROM,
check CD-ROM DRIVE and click the [Next] button.
When the driver installation is completed, an "Installation
complete" window will appear on the screen. Then, click
the [Finish] button.
Go to the following destination to confirm that the
installation was completed successfully.
■ Windows 98:
[ Control Panel ] → [ Systems ] → [ Device Manager ] →
[ Hard Drive ]→ MPIO FY700 USB Device
Note
● In Windows 98/98SE, the program must be installed to use
FY700 as a removable disk. Please install the USB drivers
before use.
Click
15