Table of Contents
Advertisement
Formatting
You can format FY500 from a Windows PC using MPIO Utility.
Turn the power of FY500 ON and connect it to a computer using a USB cable.
1
2
Double-click MPIO Utility icon in your desktop.
Click the [Format & Config] button.
3
Click
5
Click the [ Start ] button.
Click
Click the [ OK ] button.
4
Click
6
Click the [ OK ] button.
Click
7
When formatting is complete, click
the [ OK ] button.
Click
9
Click the [ OK ] button after the "Safely
Remove Hardware" message appears as
shown.
Click
Note
The captured screens of MPIO Utility may vary for the user's PC environment.
MPIO Utility cannot be run under MAC OS.
For information regarding MPIO Utility installation, refer to [Installing the software] on page 13.
8
Click the [ Close ] button.
Click
10
After clicking the [ OK ] button, Format & Config
(Default Setting Restoration) is complete. You
may separate the device from the PC.
Click
Advertisement
Table of Contents
