When Using SnapOPC+ (SDVs and SDPVs) ..........50 When Using Thin Provisioning Volumes (TPVs) ..........51 Set Thin Provisioning ....................51 Create Thin Provisioning Pool ..................53 Create Volume ......................61 Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 3
Setting Deduplication/Compression after a TPP Creation ..........101 Set Deduplication/Compression Mode ................103 Set Thin Provisioning ....................104 Create Thin Provisioning Pool ..................106 Set Deduplication/Compression ...................113 Expand Thin Provisioning Volume ................115 Create Volume ......................116 Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 4
Required Settings for the Key Management Function ............121 A. Installing the Security Certificate For Google Chrome.................. 125 B. Structures for Host Connection C. Estimated Advanced Copy Source Capacity Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Figure 2 Relation between the ETERNUS DX/AF and the key server ........124 Figure 3 Basic concept of host connection (when using host groups)........127 Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
This manual provides operational information on how to set up and configure the environment for the Fujitsu Storage ETERNUS AF series, ETERNUS DX200F All-Flash Arrays, and ETERNUS DX S4/S3 series Hybrid Storage Systems via Web GUI (hereinafter referred to as "ETERNUS Web GUI").
Oracle Solaris may be referred to as "Solaris", "Solaris Operating System", or "Solaris OS". • Microsoft® Windows Server® may be referred to as "Windows Server". • Trademark symbols such as ™ and ® are omitted in this document. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 9
Note that the screen shots in this manual were captured during development of the software and the actual screens may be different. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
ETERNUS Web GUI can be operated from a web browser by connecting the PC via a LAN con- nection. Figure 1 Outline of ETERNUS Web GUI Refer to "2. Startup and Shutdown" (page 16) for details of ETERNUS Web GUI startup. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
● Easy operation If a hardware failure is detected, the system administrator can receive a mail containing detected failure information. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The login state of ETERNUS Web GUI for the current user is lost. Click the [OK] button to return to the login screen. Log in again to continue using ETERNUS Web GUI. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
When Auto Reading of pages is available, enable the setting • When using ETERNUS Web GUI with Microsoft Edge, also note the following points: Disable the Microsoft Defender SmartScreen function Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Refer to "Appendix User Roles and Policies" in "ETERNUS Web GUI User’s Guide" for details about user roles and policies. ■ Guide of Initial User Accounts for Fujitsu Maintenance Engineers Fujitsu would like to thank you for purchasing our products.
For details about the ETERNUS Web GUI screen structures and basic operations (such as filter settings and updating the screen display), refer to "Screen Operations for ETERNUS Web GUI" in "ETERNUS Web GUI User's Guide". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Enter the IP address for the ETERNUS DX/AF in the address bar of the web browser. The login screen for ETERNUS Web GUI is displayed. Refer to "Login" (page 18) detailed procedure to log in. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 17
"A. Installing the Security Certificate" (page 125). *1: Refer to "Create Key/CSR", "Register SSL Certificate", and "Create Self-signed SSL Certificate" in "ETERNUS Web GUI User’s Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
"f.ce"). Refer to "Setup User Account" in "ETERNUS Web GUI User's Guide" for details. The procedure for logging in is as follows: Click the [Option] button in the login screen, and select the language (English or Japanese). Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 19
When performing the disk diagnosis Refer to "User Management" in "ETERNUS Web GUI User’s Guide" for user accounts. Click the [Login] button. The operation screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 20
"Lockout Policy" for the locked out user account. Refer to "Setup User Account" in "ETERNUS Web GUI User's Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Click the [Logout] link on the top right of the screen. A confirmation screen appears. Click the [OK] button. This completes the logging out process. The login screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The procedure to exit is as follows: Click the [Close] button for the web browser. Exit from ETERNUS Web GUI. The login screen does not appear. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
For users without the required polices, the [Overview] screen is displayed at the first login. • The settings made in the Initial Setup can be changed individually later. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Log out when the settings are complete. Log in again, and then proceed to "Initial Setup 2" (page 33). If SED has been installed before registering the SED authentication key, reboot the ETERNUS DX/AF before logging in again. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 25
Click [Initial Setup] in [Action]. The [Initial Setup] screen is displayed after logging in for the first time. Click the [Next >>] button. Initial Setup starts. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 26
Click the [Next >>] button. A confirmation screen appears. Click the [OK] button. Setting of the storage system name starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 27
"ETERNUS Web GUI User's Guide" for details. Click the [Next >>] button. A confirmation screen appears. Click the [OK] button. Changing of the password starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 28
Click the [Skip] button to proceed to the next screen without setting. Click the [Next >>] button. A confirmation screen appears. Click the [OK] button. The Thin Provisioning setting starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 29
(for the ETERNUS DX60 S4/DX100 S4/DX200 S4, the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250 S2, the ETERNUS AF250, and the ETERNUS DX200F) License Key Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 30
Click the [Skip] button to proceed to the next screen without setting. A confirmation screen appears. Click the [OK] button. SED Authentication Key registration starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 31
Click the [Next >>] button. A confirmation screen appears. Click the [OK] button. Setting of the network environment starts. Click the [Finish] button. The completion screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 32
Restart the browser, and wait a few minutes before logging into ETERNUS Web GUI again. After logging in again, continue with the initial setup. Proceed to Initial Setup 2. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Set the E-mail notification for events that occur in the ETERNUS DX/AF. (9) Setup Syslog Set the external servers (Syslog server) for sending logs of events that are detected by the ETERNUS DX/AF. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 34
If all of the settings of Initial Setup 2 are not performed, click the [All Skip] button to exit the Initial Setup wizard. Click the [Next >>] button. Initial Setup restarts. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 35
Refer to "Modify Date and Time" in "ETERNUS Web GUI User’s Guide" for details. Setting of the date and time starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 36
Click the [Next >>] button. A confirmation screen appears. Click the [OK] button. Setting of the SNMP Agent basic starts. Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 37
Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. The main setting items are as follows. IP Version Manager IP Address (IPv4) Manager IP Address (IPv6) Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 38
A confirmation screen appears. Click the [OK] button. Setting of the SNMP Manager starts. Click the [Done] button. Proceed to [Setup SNMP Agent MIB Access View]. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 39
View Name Subtree Click the [OK] button. Returns to the original screen. Repeat Step 6-1 through Step 6-3 to configure multiple MIB Access Views. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 40
Proceed to [Setup SNMP Agent User]. The [Setup SNMP Agent User] function must be set when using SNMPv3 in SNMP com- munication between the SNMP Agent and SNMP Agent Manager. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 41
Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. The main setting items are as follows. User Name MIB View Setting Authentication Authentication Method Authentication Password Retype Authentication Password Encryption Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 42
The [Setup SNMP Agent Community] function must be used when using SNMPv1 or SNMPv2c in SNMP communication between the SNMP Agent and SNMP Manager. The SNMP Agent Community setting is not necessary when using SNMPv3 only. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 43
View Name Allowed SNMP Manager List Click the [OK] button. Returns to the original screen. Repeat Step 8-1 through Step 8-3 to configure multiple communities. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 44
Click the [Done] button. Proceed to [Setup SNMP Agent Trap]. Click the [Add] button. Click the [Skip] button to proceed to the next screen without setting. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 45
When the setting of the trap information is complete, click the [Next >>] button. A confirmation screen appears. Click the [OK] button. The SNMP Agent Trap setting starts. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 46
Click the [Next >>] button. 10-3 A confirmation screen appears. Click the [OK] button. The E-Mail Notification setting starts. 10-4 Click the [Done] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 47
Click the [Next >>] button. 11-3 A confirmation screen appears. Click the [OK] button. The Syslog setting starts. 11-4 Click the [Done] button. The completion screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 48
[Initial Setup] operations are completed. • For the other models, the [Start] screen of the [Smart Setup Wizard] is displayed after all the [Initial Setup] operations are completed. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
RAID in the ETERNUS Create a RAID group ( DX/AF Refer to: "RAID Group Creation" in "Configuration Guide (Basic)" of the model Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Select "SDV" or "SDPV" for "Type". Refer to: "Generation Management Volume (SDV) Creation" or "Copy Data Destination Volume (SDPV) Creation" in "Configuration Guide (Basic)" of the model Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
DX200 S4 1CM model and the ETERNUS DX60 S3/DX100 S3/DX200 S3 1CM model. In addi- tion, the [Thin Provisioning] navigation is not displayed for these models. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 52
Click the [Set] button. A confirmation screen appears. Click the [OK] button. The Thin Provisioning setting starts. Click the [Done] button to return to the [Settings] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The maximum pool capacity is the maximum total capacity for TPPs and Flexible Tier Pools (FTRPs) that can be created in the ETERNUS DX/AF. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 54
The procedure to create a TPP by selecting drives automatically is as follows: Click [Create] in [Action]. The [Create Thin Provisioning Pool] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 55
The maximum capacity that can be used to create new TPPs is displayed to the right of the setting field for "Thin Provisioning Pool Total Capacity" in the "Max: xx.xx [PB/TB/GB/ MB]" format. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 56
(mirroring pair drives) by dividing them into two or more connec- tion lines (for the ETERNUS DX500 S4/DX600 S4, the ETERNUS DX500 S3/DX600 S3, the ETERNUS AF650 S2, and the ETERNUS AF650). Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 57
The procedure to create a TPP by selecting drives manually is as follows: Click [Create] in [Action]. The [Create Thin Provisioning Pool] screen appears. Select "Manual" for "Create Mode" and specify the other parameters. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 58
Click the [Tabular] tab to select drives from the list. Only unused drives are displayed on the list. The main setting item is as follows. • Checkbox to select drives Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 59
The drive capacity that is displayed for the SSD-L differs from the product’s actual capacity. For example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 60
A confirmation screen appears. Click the [OK] button. Create Thin Provisioning Pool starts. Click the [Done] button to return to the [Thin Provisioning Pool] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The [Create Volume] screen appears. Select "Thin Provisioning Volume" for "Type" and "Automatic" for "RAID Group / TPP Selection". Specify the detailed information of new volumes. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 62
Click the [Create] button. A confirmation screen appears. Click the [OK] button. TPV creation starts. Click the [Done] button to return to the [Volume] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 63
Select "Thin Provisioning Volume" for "Type" and "Manual" for "RAID Group / TPP Selection". Specify the detailed information of new volumes and select the TPP in which the volumes are to be created. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 64
Click the [Create] button. A confirmation screen appears. Click the [OK] button. TPV creation starts. Click the [Done] button to return to the [Volume] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Create a CA port group (a group of CA ports that are connected to the specified host group) that is used for the server to access the ETERNUS DX/AF. Refer to: Create CA Port Groups Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 66
Set CA Reset Group Set member ports for a CA reset group to reduce the effect when ports become inaccessi- ble. Refer to: Modify CA Reset Group Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Refer to "Setup Subsystem Parameters" in "ETERNUS Web GUI User's Guide" for details. The procedure to create a LUN group is as follows: Click [Add LUN Group] in [Action]. The [Add LUN Group] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 68
LUNs from. The main setting items are as follows. ● LUN Setting • Start Host LUNs • Number of LUNs • Select Volume Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 69
[Create] button. A confirmation screen appears. Click the [OK] button. Adding LUN group starts. Click the [Done] button to return to the [LUN Group] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Select which FC port to set the parameters for (multiple selections can be made) and click [Configure FC Port] in [Action]. The [Modify FC Port Parameters] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 71
If the Loop ID is changed while a server is operating, reboot the server immediately. If the server is operated without being rebooted, a warning message may appear or a sys- tem failure may occur. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
To set parameters to multiple ports, select the target ports and specify the parameters for each port. After the specification is complete, click the [Modify] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 73
CHAP User ID New Password Confirm new Password • General Settings Transfer Rate (This item is displayed only when the port type is "10G Base-T iSCSI") Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 74
Checks the connection status between the target port and the destination storage system. The main setting items are as follows. ● Send ping (IP address) • IP Address • Send Number • Result Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
When changing port parameters during operation, stop access from the server that is con- nected to the target port. Host access does not need to be stopped to change the port parameters of newly added CA ports. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 76
To set parameters to multiple ports, select the target ports and specify the parame- ters for each port. After the specification is complete, click the [Modify] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
This function sets the parameters for the FCoE host interface port that connects between the ETERNUS DX and the host. Refer to "Modify FCoE Port Parameters" in "ETERNUS Web GUI User’s Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The procedure to create an FC port group is as follows: Click [Create FC Port Group] in [Action]. The [Create FC Port Group] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 79
A confirmation screen appears. Click the [OK] button. Registration of the FC port group starts. Click the [Done] button to return to the [CA Port Group] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
For details on assigning an appropriate host response, refer to "Configuration Guide -Server Connection-". For details on modifying the host response settings, refer to "Add Host Response" in "ETERNUS Web GUI User's Guide". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
If an appropriate host response is not configured to the host group, the path may not be switched correctly or the volume may not be recognized correctly. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 82
Input a host group name to be created, and select a host response to be assigned to the host group. The main setting items are as follows. ● Host Group Setting • Host Group Name • Host Response Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 83
CA port settings of the ETERNUS DX/AF. If there is no error in the connection environment, contact the Support Department, or specify the WWN manu- ally. Click the [Add] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 84
The main setting item is as follows. ● Host Setting Click the [OK] button. Returns to the [Manual Input] screen. Repeat Step (2) through Step (4) to set more WWNs. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 85
Registration of the FC host group starts. Click the [Done] button to return to the [Host Group] screen. Click the [Continue] button to continue registering FC host groups. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The procedure to create a host affinity when the target connection is "Host Group - CA Port Group" is as follows: Click [Create Host Affinity] in [Action]. The [Create Host Affinity] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 87
■ When "Host Group" is selected Select a host group to configure a host affinity, and click the [OK] button. The display returns to the initial screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 88
The display returns to the initial screen. Click the [Browse...] button for the CA port group. The [Select CA Port Group] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 89
The CA port group is used by another host affinity Click the [Browse...] button for the LUN group. The [Select LUN Group] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 90
To edit the path between a host and a CA port, click the [Edit] button for the path to be edited. The [Select CA Port] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 91
[Create] button. A confirmation screen appears. Click the [OK] button. The host affinity creation starts. Click the [Done] button to return to the [Connectivity] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
For details on changing the CA reset group according to instructions in "Configuration Guide -Server Connection-", refer to "Modify CA Reset Group" in "ETERNUS Web GUI User's Guide". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Create REC Disk Buffer REC Disk Buffer allocation Assign REC Disk Buffer REC multiplicity setting Modify REC Multiplicity REC bandwidth limit setting Set REC Bandwidth Limit Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 94
To use SnapOPC+, create any of the following types of vol- umes. SDV (SDPVs must be created as expansion areas) Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 95
Set the Copy path information between local and remote devices. (3) REC Buffer setting Set the transfer buffer when performing REC in asynchronous consistency mode. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
For REC sessions, checking copy path and buffer status are also available. Refer to "Copy Path" and "REC Buffer" in "ETERNUS Web GUI User’s Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Disable the ODX function. Refer to "Disable ODX" in "ETERNUS Web GUI User's Guide" for details. Reboot any servers that are connected to the ETERNUS storage systems. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Check the CM memory size in the [Controller Module Detail] screen before using the Deduplication/Compression function. Refer to "Controller Module" (page 98) for details. Controller Module The CM information is displayed. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 99
DX600 S3), install "Memory Extension" in the ETERNUS DX. Note that the [Add Memory] function can be performed by a maintenance engineer who has the "Maintenance Operation" policy. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Deduplication/Compression System Volumes (or the DEDUP_SYS Volume and the DEDUP_MAP Volume) are automatically created in the relevant TPP. Refer to: "Automatically selecting drives to create TPPs" Create Thin Provisioning Pool Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Refer to: Set Deduplication/Compression Mode Set Thin Provisioning Enable the Thin Provisioning function and then set the maximum pool capacity. Refer to: Set Thin Provisioning Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 102
Create Deduplication/Compression Volumes. The Deduplication/Compression Volume is a volume that has the Deduplication, Compression, or both enabled. Select "Thin Provisioning Volume" for "Type". Refer to: Create Volume Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The procedure to enable the Deduplication/Compression function for the ETERNUS DX is as fol- lows: Click [Set Deduplication/Compression Mode] in [Action]. The [Set Deduplication/Compression Mode] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Check the [Settings] screen to confirm whether the "Maximum Pool Capacity" of each model is set. Refer to "Settings (Thin Provisioning)" in "ETERNUS Web GUI User's Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 105
Select "Enable" for "Thin Provisioning" and then select the "Maximum Pool Capacity" value. The main setting items are as follows. ● Thin Provisioning Settings • Thin Provisioning • Maximum Pool Capacity Click the [Set] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Drives that satisfy all of the following conditions are installed in the ETERNUS DX/AF. • The drive types are the same • The drive capacities are the same • The sector format (AF-compliant/non-AF-compliant) is different Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 107
Select "Enable" for "Deduplication", "Compression", or both, and then specify the other parameters. The main setting items are as follows. ● New Thin Provisioning Pool • Name Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 108
Select drives manually and create a TPP with a chunk size of "21 MB". Refer to "The number of member drives in each RAID group" (page 56) "Requirements for selecting drives" (page 56) for details about requirements. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 109
Ready" checkbox in the "Chunk Size" field, and then specify the other parameters. The main setting items are as follows. ● New Thin Provisioning Pool • Name Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 110
Click the [Tabular] tab to select drives from the list. Only unused drives are displayed on the list. The main setting item is as follows. • Checkbox to select drives Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 111
For example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB". Click the [OK] button. The screen returns to the previous screen. The created RAID group is displayed in the RAID group list. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 112
A confirmation screen appears. Click the [OK] button. Create Thin Provisioning Pool starts. Click the [Done] button to return to the [Thin Provisioning Pool] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
System Volumes (or the DEDUP_SYS Volume and the DEDUP_MAP Volume) are automat- ically created in the relevant TPP. Refer to "Set Deduplication/Compression" in "ETERNUS Web GUI User’s Guide". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 114
The [Set Deduplication/Compression] screen appears. Select "Enable" for "Deduplication", "Compression", or both. Click the [Set] button. A confirmation screen appears. Click the [OK] button. The Deduplication/Compression setting starts. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
The procedure to expand DEDUP_SYS Volume capacity is as follows: Select the DEDUP_SYS Volume to be expanded and click [Expand TPV] in [Action]. The [Expand Thin Provisioning Volume] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
If the TPP is configured with one RAID group, the maximum logical volume capacity of the Dedu- plication/ Compression Volumes must be equal to or less than five times the logical capacity of the DEDUP_SYS Volume in the relevant TPP. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 117
Enable Enable Available Enable Disable Available Disable Enable Available Disable Disable Available Available Available Available Available: Volumes can be created N/A: Volumes cannot be created Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 118
Select the following items to specify the detailed information of new volumes. • "Thin Provisioning Volume" for "Type" • "Enable" for "Deduplication", "Compression", or both • "Automatic" for "RAID Group / TPP Selection" Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 119
The procedure to create Deduplication/Compression Volumes by selecting a destination TPP manually is as follows: Click [Create] in [Action]. The [Create Volume] screen appears. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 120
Click the [Create] button. A confirmation screen appears. Click the [OK] button. Volume creation starts. Click the [Done] button to return to the [Volume] screen. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
RAID groups that use the common key and RAID groups that use the key in the key server (RAID groups that are registered in the key group) can be used in the same storage system. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 122
Refer to "Import SSL/KMIP Certificate" in "ETERNUS Web GUI User's Guide" for details. For details on how to export the SSL/KMIP certificate, refer to the manuals of the key man- agement software "ETERNUS SF KM". Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 123
(2) SED key group Check the key group setting state of the RAID group. Refer to "SED Key Group" in "ETERNUS Web GUI User's Guide" for details. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 124
The ETERNUS DX/AF obtains the key from the key server by using the "Storage System Group Name", "Key Management Machine Name", and "Key Group Name" as the password. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Specify the file name to import and click the [Next] button. Select "Trusted Root Certification Authority" and click the [Next] button. Click the [Finish] button. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
For the host, host affinity is a function that controls access permissions to volumes. • Host affinity setting The host affinity setting is an operation that assigns hosts (host groups) or ports (port groups) to LUN groups. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 127
Default Host B - HBA2 Host Group C Host C - HBA1 Default Host C - HBA2 Host D - HBA1 Host D - HBA2 Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 128
"CA port group Y" cannot be allocated to the specific host group. (Setting exam- ples No.3 and No.4 cannot be configured in the same environment.) Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
DX8900 S3 (12 GB) (Using 1 TB=1,024 GB Decimals rounded off at the second place) *1: REC is not available for the ETERNUS DX60 S4/DX60 S3. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited P2X0-1250-31ENZ0...
Page 130
(Using 1 TB=1,024 GB Decimals rounded off at the second place) The copy source capacity is assumed that almost 100% of the copy table size is used. Fujitsu Storage ETERNUS AF, ETERNUS DX Configuration Guide (Web GUI) Copyright 2024 Fujitsu Limited...
Page 131
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.
Need help?
Do you have a question about the ETERNUS AF Series and is the answer not in the manual?
Questions and answers