The mainboard provides connectors to connect to FDD, IDE HDD, case,
LAN, USB Ports, IR module and CPU/System/Power Supply FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
CD-In Connector: JCD1
The connector is for CD-ROM audio connector.
Fan Power Connectors: CPU_FAN1/SYS_FAN1
The CPU_FAN1 (processor fan) and SYS_FAN1 (system fan) support
system cooling fan with +12V. They support three-pin head connector. When
connecting the wire to the connectors, always take note that the red wire is the
positive and should be connected to the +12V, the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware Moni-
tor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
FDD1
Connectors
R
GND
L
JCD1
Hardware Setup
Sensor
+12V
GND
CPU_FAN1
Sensor
+12V
GND
SYS_FAN1
2-15