MS-7003 M-ATX Mainboard
spikes of the pulses are reduced to flatter curves. If you do not have any EMI
problem, leave the setting at Disabled for optimal system stability and
performance. But if you are plagued by EMI, select Enabled for EMI reduction.
Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clockspeed which may just
cause your overclocked processor to lock up. Available options: Enabled,
Disabled.
CPU FSB Clock
This item allows you to select the CPU clock frequency (in MHz) and overclock
the processor by adjusting the clock to a higher frequency. Key in a DEC
number between 100~232.
3-28