MSI MS-7003 User Manual page 55

MS-7003 M-ATX Mainboard
AGP Aperture Size
This setting controls just how much system RAM can be allocated to AGP for
video purposes. The aperture is a portion of the PCI memory address range
dedicated to graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation. The option allows the
selection of an aperture size of 32MB, 64MB, 128MB, 256MB, 512MB, 1GB,
2GB and None.
Onboard VGA Frame Buffer
Frame Buffer is the video memory that stores data for video display (frame).
This field is used to determine the memory size for Frame Buffer. Larger frame
buffer size increases video performance. Settings: 8M, 16M, 32M, 64M, 128MB
and None.
Video Display Devices
Use the field to select the type of device you want to use as the display(s) of
the system. Settings: Auto, CRT Only, CLD Only, DFP Only, TV Only, CRT
Force Other Auto, TV Force Other Auto, CRT Force TV Force.
TV Standard
Select the TV standard which is used as the video signal format of your TV if
you have connected a TV to the system. Setting are: NTSC, PAL, PAL-M, PAL-
60, NTSC-JAP, PAL-CN, PAL-N, SCART_RGB.
Memory Hole
In order to improve performance, certain space in memory can be reserved for
ISA peripherals. This memory must be mapped into the memory space below
16MB. When this area is reserved, it cannot be cached. Settings: Disabled,
3-14