MSI MS-7003 User Manual page 63

MS-7003 M-ATX Mainboard
Soft-Off by PWRBTN
This feature allows users to configure the power button function. Settings
are:
Instant-Off
By HardWare
PowerOn by PCI card
This item specifies whether the system will be awakened from power saving
modes (S1, S3, S4) when activity or input signal of the specified hardware
peripheral is detected. Settings are: Enabled and Disabled.
Power ON Function
This item controls how the PS/2 mouse or keyboard can power on the
system. Settings: Password, Hot Key, Mouse Left, Mouse Right, Any, Key,
BUTTON ONLY and Keyboard 98.
Keyboard Power ON Password
If Power ON Function is set to Password, then you can set a password in the
field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can sssign a hot key combi-
nation in the field for the PS/2 keyboard to power on the system. Settings:
Ctrl-F1 through Ctrl-F12.
PWRON After PWF-Fail
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off
On
Former-Sts
3-22
The power button functions as a normal power-on/-
off button.
When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.
Leaves the computer in the power off state
Reboots the computer
Restores the system to the status before power
failure or interrupt occurred.