MSI MS-7003 User Manual page 59

MS-7003 M-ATX Mainboard
Onboard LAN Device
This item allows you to enable/disable the LAN controller. Setting options:
Enabled and Disabled.
Onboard 1394 Device
This item allows you to enable/disable the onboard IEEE1394 controller.
Setting options: Enabled and Disabled.
Onboard Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it. If you install add-on FDC or
the system has no floppy drive, select Disabled in this field. The settings
are: Enabled and Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for Serial Port 1. The set-
tings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Settings: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.
3-18