Overview; Features - NSD ABSOCODER NCW-3DHPNV1R Specifications & Instruction Manual

1. OVERVIEW

NCW-3DHPNV1R (hereinafter referred to as NCW-3DHPN) is an ABSOCODER converter, a slave unit for
PROFINET, can communicate with PROFINET. With the use of NCW-3DHPN in combination with the single-turn
type of ABSOCODER sensor, the machine position can be detected. The detected position data can be
transmitted to the programmable logic controller (PLC) and industrial computer through the PROFINET
communication.
Or, the PLC and industrial computer can readout the converter status information and set parameters.
This manual assumes that NCW-3DHPN and a programmable controller which is manufactured by Siemens AG, Inc.
are connected by the network. Therefore, we explain the manual by using a configuration tool "STEP7 V14
Professional SP1" developed by Siemens AG, Inc.. For the details of the tool, refer to manual of the "STEP7 V14
Professional SP1".
If the configuration tool is needed the definition file (GSDML file), download it from NSD website.

1-1. Features

(1) High reliability
An absolute position detection format ensures accurate position detection even if a power interruption or
unexpected noise condition occurs. An origin returning operation is not required.
(2) Superior durability
ABSOCODER sensor is not used electronic parts except coils and resistance, and it features a no-contact
construction excepting bearing. This sensor offers problem-free operation, even in environment where it is
exposed to vibration, impact shocks, extreme temperatures, oil, and dust.
(3) Compact design
The unit's outside dimensions (39(W) x 155(H) x 93(D)) were miniaturized. DIN rail can be used, so mounting is
much easier.
(4) PROFINET communication
A position, preset, alarm, and parameter data can be transmitted through the PROFINET network.
- The communication speed and format is decided by Auto-Negotiation function.
(5) Two ABSOCODER sensors can connect
The machine positions for two axes can be detected by one converter. The space-saving in the control panel can
be conducted.
(6) Diagnosis function
The error information can be expressed both by PROFINET alarm data and by monitor LEDs on the converter's
front panel.
(7) Preset function
The position data can be preset to the desired value from the PROFINET controller.
(8) Configuration tool (software for configuring the system)
Settings are available by using PROFINET software.
(9) Applicable with JKPEV-S cable
A commercially available cable (JKPEV-S 1.25mm
sensor.
(10) Compliance with CE standards
The converter complies with CE (EMC Directive) standards.
x 5P) can be used between the converter and ABSOCODER
2
1