Assembling Your Ip Handset; Equipment Overview - Linksys SPA-942 Quick Start Manual

1. Assembling your IP handset and
connecting to the network
1. Find the end of the coiled phone handset cord that has
the longer straightened end. Plug that end into the back
of the phone base (phone symbol).
2. Plug in short straightened end of the handset cord into
the jack at the bottom of the handset (not shown).
3. If you are using an external power source, push the
power cord into the power supply, and plug the power
supply into the phone base unit. Use only the power
supply that came with the phone. SPA922 &SPA942
can be configured without external power, if connecting
to an IEEE powered Ethernet switch.
4. Plug the Ethernet cable into the back of the base
station. Plug the other end of the Ethernet cable
into your already prepared network connection
in your Integrated Access Device.

2. equipment overview

The phone display screen. It shows
the date, time, the phone number,
LCD screen incoming caller's ID (if available),
line/call status, extension numbers
and the soft button features.
Lines Shows extension number and status.
Press to select an feature shown in
soft buttons
the soft button feat res.
Shows available choices based on
soft button
current phone function. Displayed
features
on the last line of the LCD screen.
Allows you to navigate (left, right,
navigation
up, down) through the soft button
button
features.
Soft button
redial
features
Navigation button
(left, right, up, down)
LCD screen
dir cwfd dnd
Lines
Soft
buttons